Van Maele. ALPA

Sheet metal micrometer ALPA BB117 Resolution 0,01 mm. Suited for measurement of sheet metal thickness. HM contact surfaces. Painted frame.

Resolution 0,01 mm. Suited for measurement of sheet metal thickness. HM contact surfaces. Painted frame. - HM contact surfaces - Resolution 0.01 mm

BB11725, BB11750

From €108.00

Simple bevelled square in hardened stainless steel ALPA HA090 The two chamfered and lapped sides allow a more accurate visual check. Entirely grinded. High accuracy, manufactured and tested according to very strict procedures, according to DIN875/00. Serially numbered.

HA090100, HA090150, HA090200, HA090250, HA090300, HA09050, HA09075

From €112.00

Sine-bar table ALPA EB100 Hardened stainless steel, hardness 60 HRC, lapped surfaces, flatness accuracy ± 0,001 mm, cylinders distance accuracy ± 0,005 mm.

EB100100, EB100200

From €233.00

Slide caliper for external grooves ALPA AB100 - Accuracy ± 0.04 mm (150) | Resolution 0.05 mm| Slider with locking button

- Accuracy ± 0.04 mm (150) | Resolution 0.05 mm| Slider with locking button | Stainless steel

AB100150, AB100200

From €137.00

Slide caliper for internal grooves ALPA AB067 - Accuracy ± 0.04 mm (160) | Resolution 0.05 mm| Slider with locking screw | Matt chrome finish scale

AB067160, AB067200, AB067300

From €98.00

Slide caliper for pipes ALPA AB080 - Accuracy ± 0.04 mm | Resolution 0.05 mm | Stainless steel structure | Slider with locking button

- Accuracy ± 0.04 mm | Resolution 0.05 mm | Stainless steel structure | Slider with locking button | Hardened stainless steel

AB080150, AB080200

From €104.00

AB0701000, AB070300, AB070500

From €620.00

Slide caliper with gauge and preload IP54 with preset ALPA AA125 - Accuracy ± 0.02 mm | Resolution 0.01 mm | IP67 protection | Electronics protected against dust and brief immersion in water | Carbon fibre structure with light alloy parts | Slider with locking screw and micrometric adjustment | Data output | Digital caliper for measuring internal/external dimensions with spring pre-load system | Effective pre-load stroke 20 mm | Supplied with dial gauge 0.01 mm | Adaptor and pair of spherical tips Ø 3 mm (Ø 20 mm disk type available on request)

AA1251000, AA1251500, AA1252000, AA1252500, AA1253000, AA125400, AA125600, AA125800

From €3764.00

AA120200, AA120300, AA120500

From €2325.00

Slide caliper with long jaws ALPA AB075 - Accuracy ± 0.04 mm | Resolution 0.05 mm| Slide caliper with long jaws for external measurements

AB075150, AB075200

From €157.00

Slide caliper with long jaws for internal measurements ALPA AB090 - Accuracy ± 0.04 mm (150) | Resolution 0.05 mm| Slider with locking button

AB090150, AB090200

From €143.00

Slide caliper with outside points ALPA AB040 - Accuracy ± 0.05 mm (300) | Resolution 0.05 mm | Stainless steel structure | Slider with locking screw

AB040300, AB040400, AB040500

From €172.00

Slide depth caliper ALPA AB055 - Accuracy ± 0.04 mm (150) | Resolution 0.05 mm| Slider with locking screw | High precision

AB0551000, AB055150, AB055200, AB055300, AB055400, AB055500

From €43.00

Slide depth caliper made of hardened stainless steel ALPA AB050 - Accuracy ± 0.05 mm (250) | Resolution 0.02 mm | Hardened stainless steel structure | Slider with locking screw and micrometric adjustment | Engraved, easy-to-read and long-lasting precision graduation, slightly set back, protected by two shoulders for guiding the slider | Manufactured according to DIN 862 | High precision

- Accuracy ± 0.05 mm (250) | Resolution 0.02 mm | Hardened stainless steel structure | Slider with locking screw and micrometric adjustment | Engraved, easy-to-read and long-lasting precision graduat...

AB0501000, AB050250, AB050300, AB050400, AB050500

From €537.00

Slide depth caliper made of hardened stainless steel ALPA AB057 - Accuracy ± 0.05 mm (300) | Resolution 0.05 mm | Hardened stainless steel structure | Slider with locking screw and micrometric adjustment | Engraved, easy-to-read and long-lasting precision graduation, slightly set back, protected by two shoulders for guiding the slider | Manufactured according to DIN 862 | Suitable for model makers, having the following etched shrinkage scales: 1%, 1,5%, 2%, mm | Other scales available on request | Manufactured according to DIN 862

- Accuracy ± 0.05 mm (300) | Resolution 0.05 mm | Hardened stainless steel structure | Slider with locking screw and micrometric adjustment | Engraved, easy-to-read and long-lasting precision graduat...

AB057300, AB057500

From €694.00

Slide depth caliper with double hook ALPA AB062 - Accuracy ± 0.04 mm (200) | Resolution 0.05 mm| Slider with locking screw | High precision

AB062200, AB062300

From €137.00