Van Maele. KNIPEX

Bent nose pliers for external circlips KNIPEX 49 21 A01/A11/A21/A31/A41 90° bent pliers for external elastic circlips for shafts, chrome-vanadium steel, oil-hardened for high stresses in continuous use, high precision and optimal movement. Handles with anti-slip synthetic resin coating.

90° bent pliers for external elastic circlips for shafts, chrome-vanadium steel, oil-hardened for high stresses in continuous use, high precision and optimal movement. Handles with anti-slip syntheti...

F048810-25, F048819-60, F04883-10, F048840-100, F048885-140

From €24.55

Bolt cutters KNIPEX 71 72 460 Bonderized grey head, bi-component coated handles. Induction hardened cutting edges, 62 HRC hardness, screw-on, exchangeable head. High-quality vanadium chrome, oil hardened, tempered steel blade. Special steel, tempered joint, tubular, powder coated handles.

F2318460, F2318610

From €115.85

Cable shears for ropes and steel wire KNIPEX 95 61 190 Shears for ropes, cables and steel wire with two crimping profiles for the bowden cable caps and for wire rope terminals. Screw joint for precise guidance of the adjustable blade, optimum transmission ratio for cutting with minimum effort. Forged chrome-vanadium steel with cutting hardness approx. 64 HRC, handles coated with synthetic resin. Usage: - Copper wires with thin wires Ø 6 mm max - Wire rope Ø 6 mm max - Medium hard steel wire Ø 4 mm max - Harmonic steel wire Ø 2,5 mm max

F2200190

From €50.55

Cable shears for VDE Insulated cable 1000 Volts KNIPEX 95 16 165 Shears for cutting copper and aluminum cables, which can not be used for steel wire or cold drawn copper cables. Cold,clean cut without crushing with contrast stop to avoid accidental crushing of the fingers. Special steel for hardened, forged and oil-hardened tools, VDE tested, compliant with EC 60900 DIN EN 60900 standard.

F2201165

From €53.40

Cable shears KNIPEX 95 06 230 Shears for cutting single-core copper conductors with cross-section up to 16 mm², multipolar up to 50 mm² and thin wire up to 70 mm², not usable for steel wire or cold drawn copper cables, with contrast stop to prevent accidental cutting of the fingers. Adjustable screw joint, with return spring and pawl. Tempered stainless steel, Insulated coated handles with thermoplastic resin VDE tested, compliant with EC 60900 DIN EN 60900.

F2210230

From €60.40

Cable shears KNIPEX 95 12 165 Shears for cutting copper and aluminum cables, which can not be used for steel wire or cold drawn copper cables, cold, clean, cut without crushing. With contrast stop to avoid accidental finger crushing. Special steel for tempered, forged oil-hardened tools, handles coated in bi-componement material.

F2197165

From €35.10

Cable shears KNIPEX 95 12 200 Shears for cutting copper and aluminum cables which can not be used for steel wire or cold drawn copper cables. Cold, clean cut without crushing, subdividing the cutting operation in the first cut (for Insulating sheath, in front area of the cutting edge) and finishing cut (for the conductor, in the rear area of the cutting edge) It is possible to cut cables up to 20 Ø with one single hand. With contrast stop to avoid accidental finger crushing.
Special steel for tempered, forged, oil-hardened tools, handle coated in bi-component material.

F2198200

From €60.10

Cable shears KNIPEX 95 12 500 Shears for cables with reduced weight to cut unipolar or multi-core copper and aluminum cables not usable for rope and steel wire Cold clean cut without crushing. With contrast stop to prevent accidental crushing of the fingers. Adjustable screw joint, stainless steel head. Chrome vanadium forged, oil-hardened, handles in highly resistant tubular aluminum, grip handles in bi-component material.

F2199500

From €140.85

Cable shears VDE insulated 1000 Volt KNIPEX 95 16 160 StepCut shears for cutting multipolar copper and aluminum cables with section up to 50 mm², not usable for steel wire and cold drawn copper cables. The shaped shape of the cutting edges allows an optimal cut without crushing with a much lower effort than standard shears of the same length. With contrast stop to avoid accidental pinching of fingers. Special tool steel tempered, forged and oil-hardened, VDE-tested insulated handles made of two-component material, according to EC 60900 DIN EN 60900.

F2203160

From €54.60

Cable strippers KNIPEX Shock-proof, synthetic resin body. Designed for round-section cable stripping, PVC, rubber, silicon, Ø 6 - 29 mm. PTFE.

F12686-29, F1268R1

From €13.75

Combination pliers for electrians and cabling KNIPEX 13 02 160 Pliers for cabling work, for clamping and bending wires, for cutting hard and medium strength wire, with precision holes for stripping cables, for crimping socket terminals.Chrome-vanadium steel, forged and oil-hardened, precision cutting edges further tempered Induction hardness approx. 60 HRC handles coated in bi-component material.

F1218160

From €40.52

Crimping pliers clamp type KNIPEX 97 00 215 A Crimping pliers with quick-release opening lever, strong clamping with minimum effort thanks to the articulated lever, reprodcuible crimping quality with automatic blaocking at the stall point to ensue high strength clamping, adjustable clamping pressure, special high resistant steel. Usage:  Pre-Insulated male and female terminals.

F1014215

From €94.50

Crimping pliers for end sleeves KNIPEX 97 53 04 Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardened tempered steel, handles coated in bi-component material.

Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased cl...

F1035180

From €180.35

Crimping pliers for end sleeves KNIPEX 97 53 08 Crimping pliers for end sleeves, DIN 46228 (part 1+4), Automatic adaptation to the size of the end sleeves, no climping errors using the wrong matrix, frontal Insertion of the sockets in the pincer, constant quality of crimping with force stop device (self-releasing mechanism). Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardend tempered steel, handles coated in bi-component material. Usage:  Square section pressing of end sleeves up to10 mm²  Possibility of Introducing laterally end sleeves up to 2,5 mm²  For all Twin end sleeves up to 2 x 4 mm² o 2 x AWG 10

F1030190

From €183.05

Crimping pliers for end sleeves KNIPEX 97 53 09 Crimping pliers for end sleeves, DIN 46228 (part 1+4), Automatic adaptation to the size of the end sleeves, no climping errors using the wrong matrix, frontal Insertion of the sockets in the pincer, constant quality of crimping with force stop device (self-releasing mechanism). Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardend tempered steel, handles coated in bi-component material.

Crimping pliers for end sleeves, DIN 46228 (part 1+4), Automatic adaptation to the size of the end sleeves, no climping errors using the wrong matrix, frontal Insertion of the sockets in the pincer, ...

F1031190

From €194.50

Crimping pliers for end sleeves KNIPEX 97 53 14 Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardened tempered steel, handles coated in bi-component material.

Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased cl...

F1036180

From €189.60