Van Maele. WRK

Fixed handles in duroplast female thread WRK Conical handles with ends rounded in duroplast black colour with glossy finish. Resistant to solvents, oils and greases, threaded blind hole.

N87514006, N87514008

From €1.79

Flap grinding discs with fiberglass backing in zirconium abrasive cloth WRK FALCON FIBRA Flap grinding discs with fiberglass backing and zirconium oxide cloth. Monolamellar-type execution with conic shaped backing pads. Cost-effective, high-performance product. The fiberglass support allows full consumption of the disc. For general use on steel, cast iron, aluminum and light alloys.

G1214115040, G1214115060, G1214115080, G1214125040, G1214125060, G1214125080

From €2.13

Flap grinding discs with fiberglass backing in zirconium abrasive cloth WRK PYTHON FIBRA Flap grinding discs in fiberglass and zirconium abrazive cloth. Bilamellar execution with conic shaped pads. Exploiting the abrasive cloth. The most wide spread in the world which guarantees an absolute balance between performance and profitability. Its fiberglass backing with conical geometry allows a uniform consumption of the cloth. Suitable for all types of stainless steel also cast Iron, alumium and light alloys.

G1219115040, G1219115060, G1219115080, G1219115120, G1219125040, G1219125060, G1219180040, G1219180060

From €2.65

Flap grinding discs with nylon backing in zirconium abrasive cloth WRK FALCON PLASTICA Flap grinding discs with nylon backing and zirconium abrasive cloth. Monolamellar execution with flat shaped backing pads. High performance economical. Suitable for use on all stainless steel materials and also cast iron, aluminum and light alloys.

G1218115040, G1218115060, G1218115080, G1218125040, G1218125060, G1218125080

From €2.13

Flap grinding discs with plastic backing in aluminium oxide abrasive cloth WRK BULLDOG PLASTICA Flap grinding discs with plastic backing and corundum abrasive cloth. Mono lamellar feature with flat pad. Cost-effective, high-performance. Ideal on iron, plastic, polish, lacquer as well as on non-ferrous materials.

G1230125040, G1230125060, G1230125080, G1230115040, G1230115060, G1230115080

From €2.13

Flap grinding discs with plastic backing in silicon carbide abrasive cloth WRK LION PLASTICA Flap grinding discs with plastic backing and silicon carbide abrasive cloth. Bi-lamellar feature with flat back pad. Ideal on aluminum, copper, bronze, titanium, stone and high-alloy steels as well as for fibre reinforced synthetic materials.

G1235115040, G1235115080, G1235115120, G1235115220, G1235180040, G1235180080, G1235180120, G1235180220

From €2.87

Flap grinding discs with plastic backing in zirconium abrasive cloth WRK PYTHON PLASTICA Flap grinding discs with plastic backing and zirconium oxide cloth. double-sided excution with flat shaped back pad. Its abrasive cloth ensures long-lasting, quality performance. Ideal for stainless steel, as well as cast-iron, aluminum, light alloys.

G1215115040, G1215115060, G1215115080, G1215115120, G1215125040, G1215125060, G1215180040, G1215180060

From €2.65

Flap grinding discs with plastic backing in zirconium and ceramic abrasive cloth WRK BARRACUDA PLASTICA Flap grinding discs with reinforced,thick plastic backing zirconium abrasive cloth and ceramic abrasive. Bi-lamellar feature with flat back pad.Thanks to its superimposed wide flaps in pairs, it provides a larger abrasive surface as well as an increased service life of disc itself. Faster grinding at reduced pressure on extremely hard materials. Ideal for professional use, performances increased by at least 20% compared to standard discs. A fairly high power grinder is recommended so to ensure effective performance. Ideal on stainless steel, high-alloy steel, and also suitable for cast iron and titanium use.

G1240115040, G1240115060

From €5.05

Flap grinding discs with reinforced flat nylon backing in zirconium abrasive cloth WRK RAVEN EVO PLASTICA Flap grinding discs in nylon strengthed flat pad for diffilcult applications. Bilamellar execution with zirconium cooling admixture. It garantees self lubricated cold machining. The pair of grinding discs are of superior width than normal which offers an increase of the abrasive surface and an increase of the life of the discs. For correct use it is adviced to use suitable power sanders, suited for steel, high alloy steel, stainless steel also cast iron, aluminum and light alloys

G1224115040, G1224115060, G1224125040, G1224125060

From €3.91

Flap grinding discs with reinforced plastic backing and zirconium and corundum abrasive cloth WRK RED DRAGON PLASTICA Flap discs with reinforced plastic backing and thread M14 with ventilation holes. Zirconium and corundum abrasive cloth admixture Bi-Lamellar with flat shaped back pads. Thanks to the wider flaps in superimposed pairs there is a guaranteed increasment of the abrasive surface while the union of zirconium and corundum increases the versatility. It does not overheat the material being used. The threads of the M14 pad allows direct mounting on the most common angle grinders of medium and high power without the use of a classical fixing nut. Ideal on stainless steel, high alloy steels and for cast Iron, alluminium and light alloys.

G1205115040, G1205115060, G1205125040, G1205125060

From €4.48

Flap wheels for satinex machines WRK 19-mm hole abrasive rolls and driving key seat. Made in abrasive clothed corindone flaps, various types of grit. Fit for satinex machines tools for metal grinding. Also used to remove polish, protective wax coating and oxidised parts on all surfaces. Coarse grain grinders are also used on marble and stone. Recommended speed 3.500/4.000 rpm.

G4520100100120, G452010010040, G452010010060, G452010010080

From €30.49

Flap wheels in non-woven material with shank WRK Abrasive flap wheels with 6 mm shank made with non-woven fabric. Aluminum Oxide in various grains. Ideal for satin finishing of metals in general, plastic and wood.

G43105030CPM, G43103020AC, G43103020AF, G43103020AM, G43103020CPM, G43103030AC, G43103030AF, G43103030AM, G43103030CPM, G43104020AC, G43104020AF, G43104020AM, G43104020CPM, G43104030AC, G43104030AF, G43104030AM, G43104030CPM, ...

From €4.90

Flap wheels with hole WRK Abrasive flap wheels with hole, are also used for fixed and portable machines' grinding and finishing. Made in corundom with standard cotton support, can fit nearly all applications. Max speed expressed in RPM: D.165 - 5.300 , D.200 - 4.400 , D.250 - 3.600

G470516530060, G470516530080, G470516530120, G470516530180, G470516550060, G470516550080, G470516550120, G470516550180, G470520050060, G470520050080, G470520050120, G470520050180, G470525050060, G470525050080, G470525050120, G470525050180

From €26.22

Flap wheels with shank WRK Aluminium oxide flap wheels, semi-flexible support. For grinding and finishing work on small or shaped workpieces made of carbon steel, stainless steel, non-ferrous metals, fiberglass, stone and marble.

G41051010060, G41051010080, G41051010120, G41051515060, G41051515080, G41051515120, G41052010040, G41052010060, G41052010080, G41052010120, G41052515040, G41052515060, G41052515080, G41052515120, G41052525040, G41052525060, G41052525080, ...

From €2.19

FLAT CUT-OFF DISCS High performance. Suitable for steel, alloyed steel, stainless steel, cast iron and non-ferrous materials. Free from additives containing iron, sulfur and chlorine. To be used on angle grinders.

G020511516

Call for pricing

Flat cutting discs WRK MULTICUT Universal flat cutting discs. Suitable for cutting medium-small sections. To be used on angle grinders.

G035011510, G035011516, G035012510, G035012516

From €1.74