Panier
  • Votre panier est vide.
  • Menu
Cataloghi

Filter by:

Clear All
Appearance concentrated Clear
Appearance emulsion Clear
Refractometric factor Clear
Density DIN 52757 Kg/L Clear
Density DIN 52757 kg/l Clear
Appearance Clear
Weight g Clear
VOC g/l Clear
Tension Voltage Clear
For band saw blades mm Clear
Viscosity index Clear
Package Clear
Quantity L Clear
Specific weight kg/L Clear
Reserve alkalinity HCIN/10/10 ml Clear
Thickness microns Clear
Protection period months Clear
Pressure bar Clear
Air NL/min. Clear
Weight Kg Clear
Density DIN 52757 Kg/L Clear
Solubility Clear
Density DIN 52747 Kg/L Clear
Quantity Clear
pH Clear
Pieces Clear
Flow l/h Clear
Water pressure bar Clear
Air NL/min Clear
Air consumption NL/min Clear
Cooling capacity W - Kcal/h - BTU/h Clear
Thrust force* g Clear
Pressure bar Clear
Tank capacity L Clear
Power kW Clear
Voltage V Clear
Dimensions mm Clear
Empty weight kg Clear
Length m Clear
Dimensions cm Clear
Absorption L Clear
Description Clear
Recommended replacement every Clear
Filtration type Clear
Power supply V Clear
Ozone production mg/h Clear
Energy absorption kW Clear
Noisiness dB Clear
Weight kg Clear
Size mm Clear
D mm Clear
Thread E Clear
Catégories
  • /
  • LINK /
  • METALWORKING LUBRICANTS

METALWORKING LUBRICANTS

Voir comme
Trier par
Image de BORON-CHLORINE AND FORMALDEHYDE RELEASER-FREE SEMI-SYNTHETIC FLUIDS-H0125
BORON-CHLORINE AND FORMALDEHYDE RELEASER-FREE SEMI-SYNTHETIC FLUIDS-H0125 UNITEC 520 is a semi-synthetic emulsifiable cooling lubricant with a low mineral oil content. It does not contain SVHC, boron or formaldehyde releasers. Has a formidable anti-oxidant action and a very high resistance to microorganisms. The product has been designed to give maximum performance on cast iron but can also be used to machine materials such as steel, aluminium, magnesium or copper alloys. UNITEC 520 is an emulsifiable oil free from chlorinated paraffins and halides. The UNITEC 520 emulsifiable oil has been formulated for all processes that require an excellent cooling capacity without losing any of its capacity for lubricating and cleaning the workpiece.
H012520, H0125200, H01255
Plus de détails
Appelez-nous pour connaître le prix
Voir les produits (3)
Image de COVER DRAIN PROTECTIVE MAT-H4137
COVER DRAIN PROTECTIVE MAT-H4137 COVER DRAIN is a Protective that prevents the infiltration of pollutants in the drains and in the water supply.
H413760
Plus de détails
Appelez-nous pour connaître le prix
Acheter
Image de CUTTING FLUIDS-H1331
CUTTING FLUIDS-H1331 TOP TOOL III is a universal cutting fluid for all tapping and threading operations of all materials, including aluminum, stainless steels, alloys composites and polymers. Formulated with raw materials of natural origin, entirely biodegradable, TOP TOOL III possesses an exceptional lubricating capacity able to reduce the friction between the tool and the worked piece, at the same time allowing rapid chip decanting. TOP TOOL can be applied directly on the tool with a brush, an oil can and can also be dispensed with a minimal lubrication unit. ADVANTAGES - Maximize lubrication - Multimetal compatibility - Excellent on aluminum and stainless steel - Suitable for special alloys - Specific for threading
H13310,4, H133120, H13315
Plus de détails
Appelez-nous pour connaître le prix
Voir les produits (3)
Image de CUTTING FLUIDS-H1340
CUTTING FLUIDS-H1340 ALU FLUID is a lubricating oil for tapping and threading, designed and formulated for maximum performance with aluminium alloys. The unique characteristics of the ALU FLUID cutting and tapping oil, and the highly refined petroleum compounds it contains, optimizes tool lubrication and chip discharge. ALU FLUID cutting oil reduces the friction coefficient, preventing tool wear by cooling them and reducing the working temperature.
H13400,4, H13401
Plus de détails
Appelez-nous pour connaître le prix
Voir les produits (2)
Image de CUTTING FLUIDS-H1350
CUTTING FLUIDS-H1350 TAP FLUID is a lubricating oil for tapping and threading. It has been designed and formulated for maximum performance on steel alloys and stainless steel. The innovative formulation of this cutting and tapping oil allows optimal tool lubrication by creating an extremely thin film that guarantees maximum lubrication during use. Its exceptional mechanical coupling between the cutting edge and the metal make TAP FLUID tapping oil an excellent multi-purpose oil. This means it is also suitable for chip removal with bench-mounted tools.
H13500,4, H13501, H13505
Plus de détails
Appelez-nous pour connaître le prix
Voir les produits (3)
Image de DISC OIL SKIMMERS-H4045
DISC OIL SKIMMERS-H4045 RASEN D.1 is Ideal for tools machines, washing pieces machines, condenser compressors and in general where it is necessary to separate the superficial oil from the fluid below. Easily applicable even in restricted spaces, the most advanced equipment for the mechanical removal of oils pollutants from the surface of the emulsion coolants. The highest technical standards to provide: a long life, does not require maintenance. ADVANTAGES The LTEC range of oil separators today represents the best removal solution to solve the problems caused by the presence of pollutants in oil emulsion cooling lubricants and of water in washing pieces machines. • Avoid microbial degradation of the fluid in operating • Improve standards of production • Inhibiting the production of noxious fumes and mists • Reduce contamination of the machine • Eliminate downtime due to the need for manual oil removal • Built and assembled in Italy from high quality industrial products • Industrial ratio- motor • Illuminated switch • Electronic timer with 4 positions • Single key for assembly and adjustment (E27005 WRK) • Easy and safe to use thanks to the oil collection tank with level sensor • Upon request, disc type may also be supplied in sizes other than standard ones Features: • Band polyurethane polymer • Recovery of oil up to 8 kg/h as a function of viscosity
H4045D320, H4045D500, H4045DIS320, H4045DIS500
Plus de détails
Appelez-nous pour connaître le prix
Voir les produits (4)
Image de EMERGENCY KIT ANTI-OIL SPILL-H4132
EMERGENCY KIT ANTI-OIL SPILL-H4132 Emergency Kit consisting of: - 30 pads 50 x 40 cm - 6 sleeves Ø 8 x 120 cm - 6 sleeves Ø 8 x 60 cm - 1 pair of gloves - 1 mask - 3 disposal bags Supplied in a plastic trunk
H4132KIT75
Plus de détails
Appelez-nous pour connaître le prix
Acheter
Image de EMULSION OXYGENATORS-H3266
EMULSION OXYGENATORS-H3266 OXI COOLER is a combined oxygenation and cooling system featuring a DELTA 40 cooling unit, which can also be mounted onto a TOS 2.0 tramp oil separator so to accelerate separation of lubricant oil from emulsion itself. The neodymium magnet is designed to provide a safe and tight fastening of the OXI COOLER onto a steel wall, simply by inserting its bubbler tube in the bottom of the tank and coupling it to the compressed air unit. The flux valve is designed to optmise cooling air flux in relation to tank emulsion levels. ADVANTAGES: - Longer emulsion life without chemical supplement - Enhanced tool performance - Preventing unpleasant odours due to microbial metabolism - Emulsion provide from oxygenation kept at optimum PH levels. - Gradually ihibits bacterial growth - Protecting ferrous alloys against oxidation - Cooled down emulsion ensures reduced fume and fog - Significantly reduced cost of disposal
H3266OXI
Plus de détails
Appelez-nous pour connaître le prix
Acheter
Image de FINAL FILTER CARTRIDGE-H5418
FINAL FILTER CARTRIDGE-H5418 The replacement part consists of a superior quality, class H10 filter element. The clogged Filter Detection Device, installed on the oil mist collector, flashes to warn the user that the filter is only 15% efficient, allowing plenty of time to order a replacement. Replace this part by opening the Post-Filter access door and removing the used filter from the rails. The replacement is installed by following the procedure in the reverse order.
H54181000, H54182000, H54183000, H5418500
Plus de détails
Appelez-nous pour connaître le prix
Voir les produits (4)
Image de GEAR OILS-H2030
GEAR OILS-H2030 OILGEAR is a mineral oil containing EP additives and designed for lubricating gears in an oil bath. Its formulation means that OILGEAR passes tests DIN 51517 CLP, CINCINNATI P59 and P63, US STEEL 224, FLENDER GEAR BOXES. The anti-wear additives in the OILGEAR gear oil are lead-free and guarantee superior wear resistance compared to similar products.
H2030150B1, H2030150F, H2030220B1, H2030320B1, H2030320F, H203068B1
Plus de détails
Appelez-nous pour connaître le prix
Voir les produits (6)