Van Maele. OKS

Multi-purpose greases for the food industry OKS 476 476 is a NSF H1 certified multi-purpose lubricating grease for the food industry.
Its excellent formulation makes 476 grease resistant to detergents and disinfectants and is suitable for lubricating bearings, open gears, racks, worm screws, ball joints, splined shafts, slideways, springs and lever mechanisms.
476 is suitable for lubricating fittings, gaskets, moulded parts and flexible rubber elements for hot water and cold water applications.

Operating temperature -30°C to +110°C
NLGI Class 2.
NSF H1N.REG.137619

H2270B

A partir de €70.90

Multi-purpose high temperature greases OKS 420 420 is a high temperature lubricating grease suitable for lubricating support points that need to be highly lubricated. The multi-purpose 420 grease is suitable for lubricating support points that are subject to high loads, high temperature bearings and areas subject to steam and water in corrosive environments. The MOX-ACTIVE additive contained in 420, coats metal surfaces instantaneously, greatly reducing friction and wear. This makes 420 grease suitable for lubricating and soundproofing bearings, closed gears, racks, worm screws, ball joints, slideways and linear guide systems. Operating temperature -10°C +160°C. NLGI Class 1-2.

H2330B

A partir de €92.70

Protectives for metals OKS 2101 2101 is an NSF H2 certified metal protective. It creates an easily removable corrosion-resistant protective wax film that lasts for up to two years.
2101 is suitable for protecting any type of bare metal surface that is to be stored for a long time and that is exposed to atmospheric agents.
The product can be used in the metalworking, shipbuilding and transport industries.
Its innovative formulation makes 2101 highly effective and its good film-forming properties mean that it provides exceptional protection against corrosion and oxidation.

H2122400

A partir de €24.50

PTFE lubricants OKS 3751 3751 is a high performance fully synthetic lubricating oil with added PTFE to increase its adhesion and lubricating capacity.
3751 is suitable for lubricating highly loaded machine parts (even when exposed to water) and for lubricating chains, joints, guides, rolling and sliding bearings, gearboxes, accessories, hinges and locks.
3751 is NSF H1 certified and therefore suitable for use in the food industry. 3751 is resistant to hot and cold water, steam and acid and alkaline disinfectants and detergents.

Operating temperature -35°C +135°C.

H2460400

A partir de €34.20

PTFE lubricants OKS 571 571 guarantees a dry coating with P.T.F.E., colourless, clean, with anti-adhesion properties at high pressure and slow speed. Suitable for use when lubrication with oil or grease is not desired or possible. It can be used on all types of metal, plastic, ceramic and wood. 571 can also be used as a separating film in resin casting plants. The contact surfaces must be clean and grease-free. Applied in the same way as paint. Optimum coating thickness: approx. 10 microns. Dries in 5 to 8 minutes at +20°C. Operating temperature: - 180°C / +260°C.

H2410400

A partir de €26.20

Silicone grease OKS 1110 The 1110 silicone grease is a multipurpose, physiologically safe product. It is a silicone lubricant and sealant for valves. It can be used to lubricate shut-off valves and pressure control; facets, pressure swithces, thermostats. It is a sealant for vacuum and pressure systems, does not dry out, does not solidify and does not drip in a wide thermal range.
It can also be used to seal open air equipment, ships, parts subject to washing or exposed to aggressive environments, such as meters and electrical connectors; has excellent adhesive properties on all materials and can be used as a coating against aggressive chemicals and lubricants for gaskets, seals and O-rs in rubber and plastic.
Excellent resistance to most chemicals with a broad operating temperature range, reduced vapor pressure, low volatility, water resistance, chemical resistance to acetone, ethanol, ethylene, glycerol and methanol.
Meets the following standards:
DIN 51502: MSI3S-40. NLGI 3. -40°C/+200°C.
LGA Nuernberg Authorization.
DIN DVGW N Authorization NG-516BL0482.
KTW approval, recommended for D2-type seals.

H2510080, H2510500

A partir de €36.50

Silicone release agents OKS 1361 1631 is an effective parting agent and lubricant with anti-static properties. It is chemically neutral and solvent-free release agent used in plastic injection moulding or elastomer extrusion processes. 1361 creates a sliding film for joining materials such as plastic/plastic and plastic/metal, for example to make it easier to insert rubber profiles. It can be used as a mould release agent and for temperatures of up to +200°C. It provides excellent lubrication for threads on closures for pressurized steel oxygen cylinders at temperatures up to a maximum of 60°C and pressures of up to 15 bar.

H2530400

A partir de €12.80

Universal cleaner degreaser OKS 2611 2611 is a universal cleaner with high cleaning power.
Thanks to its formulation it evaporates quickly without leaving residues and has the ability to protect the material from accidental contact with corrosive agents thanks to the VCI additives contained inside.
2611 has the ability to degrease all surfaces even those with high friction value such as brakes and clutches, surfaces where paint and adhesives are to be applied. The product has the ability to remove oil and grease residues, silicon brake fluids, bonding and sealing materials.
The product has no rapid cooling, so no condensation on the surface is also free of chlorinated hydrocarbons and is free of petrol vapours.

2611 is a universal cleaner with high cleaning power. Thanks to its formulation it evaporates quickly without leaving residues and has the ability to protect the material from accidental contact wit...

J3510500

A partir de €22.60