Zoeken
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- SANDVIK
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
Abrasive stones
Toon als
Sorteren op
|
Abrasive stones 13x6x150 GESSWEIN DIEMAKER
Medium-hard stones made of aluminum oxide.
They combine fast cutting and moderate friability. Ideal for general use on hard and soft steel such as 2344, 2311, 2083 and to pre-finish aluminum.
G780513X6150, G780513X6220, G780513X6320, G780513X6400
Meer details
|
Van €12.36
|
|
Abrasive stones 13x6x150 GESSWEIN EDM
They remove the tough and tenacious deposits produced during electro-erosion processes much faster than any other stone. They contain very sharp Premium aluminum oxide for fast cutting action. A special clay-based binder allows EDM stones to keep their shape well during the machining of small details and live angles.
They crumble slowly, cut fast and do not paste up.
G781513X6120, G781513X6180, G781513X6220, G781513X6320, G781513X6400
Meer details
|
Van €12.98
|
|
Abrasive stones 13x6x150 GESSWEIN OIL TREATED
Medium hard stones with White Aluminum Oxide impregnated with oil; can be used without lubrication. Excellent for machined surfaces, fine cutting. hey maintain their form well to polish the details of the molds. Moderate crushing.
G782513X6120, G782513X6220, G782513X6320, G782513X6400
Meer details
|
Van €14.01
|
|
Abrasive stones 6x3x150 GESSWEIN DIEMAKER
Medium-hard stones made of aluminum oxide.
They combine fast cutting and moderate friability. Ideal for general use on hard and soft steel such as 2344, 2311, 2083 and to pre-finish aluminum.
G78006X3400, G78006X3600, G78006X3900
Meer details
|
Van €10.09
|
|
Abrasive stones 6x3x150 GESSWEIN EDM
They remove the tough and tenacious deposits produced during electro-erosion processes much faster than any other stone. They contain very sharp Premium aluminum oxide for fast cutting action. A special clay-based binder allows EDM stones to keep their shape well during the machining of small details and live angles.
They crumble slowly, cut fast and do not paste up.
G78106X3120, G78106X3180, G78106X3220, G78106X3320, G78106X3400, G78106X3600
Meer details
|
Van €9.48
|
|
Abrasive stones 6x3x150 GESSWEIN OIL TREATED
Medium hard stones with White Aluminum Oxide impregnated with oil; can be used without lubrication.
Excellent for machined surfaces, fine cutting.
They maintain their form well to polish the details of the moulds, moderate crushing.
G78206X3120, G78206X31200, G78206X3220, G78206X3320, G78206X3400, G78206X3600
Meer details
|
Van €10.09
|
|
Abrasive stones in ceramic fibre 1x10x100 GESSWEIN
The long ceramic fibres and a special hardening resin make these stones flexible and heat-resistant, ideal for finishing in tight spaces.
Primarily intended for use with ultrasound equipment but will also provide good performance with the DIPROFIL filing machine or by hand.
G78651X10120, G78651X10180, G78651X10300, G78651X10400, G78651X10600, G78651X10800, G78651X101000, G78651X101200
Meer details
|
Van €13.10
|
|
Abrasive stones in ceramic fibre 1x4x100 GESSWEIN
The long ceramic fibres and a special hardening resin make these stones flexible and heat-resistant, ideal for finishing in tight spaces.
Primarily intended for use with ultrasound equipment but will also provide good performance with manual filing machines or by hand.
G78501X41000, G78501X4120, G78501X41200, G78501X4180, G78501X4300, G78501X4400, G78501X4600, G78501X4800
Meer details
|
Van €13.39
|
|
Abrasive stones in ceramic fibre 1x6x100 GESSWEIN
The long ceramic fibres and a special hardening resin make these stones flexible and heat-resistant, ideal for finishing in tight spaces.
Primarily intended for use with ultrasound equipment but will also provide good performance with manual filing machines or by hand.
G78551X61000, G78551X6120, G78551X61200, G78551X6180, G78551X6300, G78551X6400, G78551X6600, G78551X6800
Meer details
|
Van €20.60
|
|
Abrasive stones in ceramic fibre Ø 3x100 GESSWEIN
The long ceramic fibres and a special hardening resin make these stones flexible and heat-resistant, ideal for finishing in tight spaces.
Primarily intended for use with ultrasound equipment but will also provide good performance with the DIPROFIL filing machine or by hand.
G7880D3120, G7880D3180, G7880D3300, G7880D3400, G7880D3600, G7880D3800, G7880D31000, G7880D31200
Meer details
|
Van €27.60
|
|
Abrasive stones in ceramic fibre Ø 3x50 GESSWEIN
The long ceramic fibres and a special hardening resin make these stones flexible and heat-resistant, ideal for finishing in tight spaces.
Primarily intended for use with ultrasound equipment but will also provide good performance with the DIPROFIL filing machine or by hand.
G7875D3120, G7875D3180, G7875D3300, G7875D3400, G7875D3600, G7875D3800, G7875D31000, G7875D31200
Meer details
|
Van €14.01
|
|
Abrasive stones oil type india rectangular section conbined grain NORTON
Impregnation procedure with special oils. Homogeneous agglomeration, uniform hardness, dimensional accuracy. Suitable for sharpening and touch-up deburring works: Rectangular section.
Combined grain.
G75202550IB6
Meer details
|
Van €25.76
|
|
Abrasive stones oil type india rectangular section NORTON
Impregnation procedure with special oils. Homogeneous agglomeration, uniform hardness, dimensional accuracy.
Suitable for sharpening and touch-up deburring works: Rectangular section.
G75150625FB14, G75150625MB14, G75151325FB24, G75151325MB24, G75151338MB26, G75151650MB36, G75152550FB8, G75152550MB8
Meer details
|
Van €10.99
|
|
Abrasive stones oil type india square section NORTON
Impregnation procedure with special oils. Homogeneous agglomeration, uniform hardness, dimensional accuracy.
Suitable for sharpening and touch-up deburring works. Square section.
G750513FF46, G750516MF56, G750519FF66, G750519MF66
Meer details
|
Van €11.67
|
|
Abrasive stones oil type india tringular section NORTON
Impregnation procedure with special oils. Homogeneous agglomeration, uniform hardness, dimensional accuracy.
Suitable for sharpening and touch-up deburring works. Triangular section.
G751010FF136, G751010MF136, G751013FF146, G751013MF146, G751016FF156, G751016MF156
Meer details
|
Van €11.47
|
|
Support for abrasive stones
Support for abrasive stones in various shapes that can be used pneumatic filing machines.
In shockproof plastic.
G9343100
Meer details
|
Van €22.66
|
|
Support for rectangular abrasive stones GESSWEIN
Support for rectangular abrasive stones.
G8012101, G801241, G801261
Meer details
|
Van €8.86
|
|
Support for rectangular abrasive stones with clamping screw GESSWEIN
Support for rectangular abrasive stones with clamping screw. Suitable for 13x6 mm stones.
G8013136
Meer details
|
Van €55.41
|
|
Supports for abrasive stones GESSWEIN
Support for abrasive stones. Supports round stones Ø 6 mm and rectangular stones having a thickness of 3 mm and a width of 6 mm.
G801066
Meer details
|
Van €36.67
|
|
Supports for abrasives stones
Support for rectangular abrasive stones usable with pneumatic filers. In burnished steel.
G9341100
Meer details
|
Van €12.77
|
|
Supports for round abrasive stones Ø 3 mm GESSWEIN
Support for round abrasive stones Ø 3 mm.
G801130
Meer details
|
Van €14.63
|
|
Wood bars for lapping and polishing rectangular GESSWEIN
The wooden bars are ideal for use with diamond paste. They are made of laminated strips of wood bonded with a resin binder.
G79553X7D, G79558X12,5D
Meer details
|
Van €2.47
|
|
Wood bars for lapping and polishing round GESSWEIN
The wooden bars are ideal for use with diamond paste. They are made of laminated strips of wood bonded with a resin binder.
G7960D3D, G7960D4,5D, G7960D6,5D
Meer details
|
Van €2.27
|
|
Wood bars for lapping and polishing square GESSWEIN
The wooden bars are ideal for use with diamond paste. They are made of laminated strips of wood bonded with a resin binder.
G79503X3D, G79504,5X4,5D, G79506,5X6,5D
Meer details
|
Van €2.06
|