Assisted control for screwing and tapping VOLUMEC VASTC - VASTC-4.0 WI-FI
All JOYTAP machines can be equipped with Touch Screen Control
VASTC or VASTC Industry 4.0 WI-FI for semi-automated tapping operations,
controlled screwing, installation of self-tapping bushes and inserted threads.
TAPPING:
- Semi-automatic tapping (pitch setting - depth - speed - torque Nm).
- Manual tapping (speed setting - torque Nm).
- Constant speed and torque during tapping thanks to the control encoder.
- Simplified programming using the integrated interface.
- Counting of the threads made.
- Data archive for later reuse.
SCREWING:
- Screwing with Automatic Stop (when the preset torque is reached).
- Luminous signal at the end of the tightening.
- Centering system before screwing.
- Simplified programming using the integrated interface.
- Constant speed and torque during screwing thanks to the control encoder.
- Counting of the tightenings performed.
- Data archive for later reuse.
All JOYTAP machines can be equipped with Touch Screen Control
VASTC or VASTC Industry 4.0 WI-FI for semi-automated tapping operations,
controlled screwing, installation of s...
N061200, N061240
Van €1250.00
Assisted control for screwing and tapping VOLUMEC VASTC-1 - VASTC-4.0-1 WI-FI
All JOYTAP machines can be equipped with VASTC or VASTC-4.0 WI-FI Touch Screen Control for semi-automatic tapping operations, controlled screwing, installation of self-tapping bushes and inserted threads.
TAPPING:
- Semi-automatic tapping (pitch setting - depth - speed - torque Nm).
- Manual tapping (speed setting - torque Nm).
- Constant speed and torque during tapping thanks to the control encoder.
- Simplified programming using the integrated interface.
- Counting of the threads made.
- Data archive for later reuse.
SCREWING:
- Screwing with Automatic Stop (when the preset torque is reached).
- Luminous signal at the end of the tightening.
- Centering system before screwing.
- Simplified programming using the integrated interface.
- Constant speed and torque during screwing thanks to the control encoder.
- Counting of the tightenings performed.
- Data archive for later reuse.
All JOYTAP machines can be equipped with VASTC or VASTC-4.0 WI-FI Touch Screen Control for semi-automatic tapping operations, controlled screwing, installation of self-tapping bushes and inserted thr...
N061400, N061440
Van €1750.00
Automatic tool lubrication system for electric tappers VOLUMEC LST01
The automatic lubrication system is activated autonomously at each tapping cycle, lubricating the tool in the desired quantity. The device can be installed (by the manufacturer) on all Joytap tapping machines.
Easy Arm manipulators VOLUMEC
Double articulated arm system to move / rotate parts of various types, shapes and materials.
Features:
- Articulated arms with pneumatic movement of reduced dimensions
- Comfortable handle with up-down and piece grip controls
- Different gripping systems available
- Easy installation
Advantages:
- Safe handling of the articles
- Large work area served Equipment:
- Use and maintenance manual
M50900251942, M50900301942, M50900461942
Van €3970.00
Electric depth sensor for electric tappers VOLUMEC EDS01
Electronic sensor with automatic tool return after reaching the predetermined working depth. The electronic depth sensor can be installed (by the manufacturer) on all Sniper and Joytap tappers.
Electric tapping machines with articulated arm VOLUMEC JOYTAP JT2
Made in Italy electric machines with Brushless motor and balanced articulated arm system entirely in aluminum that guarantees fast and precise alignment on the holes. All JOYTAP machines can be equipped with the VASTC or VASCT Industry 4.0 WI-FI Touch Screen Control (Optional) for semi-automatic tapping operations, controlled screwing, installation of self-tapping bushes and inserted threads, drilling and countersinking operations.
Features:
- Articulated arm system with adjustable balance
- IP65 high performance motor, minimum noise and low consumption
- Wide adjustment of the tapping speed
- Double counter-clockwise extraction speed that can be set at 100% or 50% of the maximum speed
- Joystick with control buttons that facilitates tool alignment and speeds up the execution of machining
- Balance and fluidity in movements guaranteed by adjustable gas springs and joints mounted on ball bearings
- Possibility to thread blind and through holes thanks to the adjustable clutches
Optional accessories:
- Volumec Assisted Screwing Tapping Control "VASTC"
- Depth sensor with automatic inversion
- Device for automatic tool lubrication
- GR2 - GR3 - GR4 quick change bushes for taps
- GR2 - GR3 quick change die holders
- GR2 quick change chucks for drills and countersinks
- Quick change chucks GR2 insert holder with 1/4 "E connection
- GR2 quick change adapters for 1/4 "- 3/8" - 1/2 "sockets
- GR2 quick change installers for self-tapping bushes
- Reduction sleeves GR4> GR3 - GR3> GR2 - GR2> GR1
- Trolleys, benches or tapping columns
Made in Italy electric machines with Brushless motor and balanced articulated arm system entirely in aluminum that guarantees fast and precise alignment on the holes. All JOYTAP machines can be equip...
N060512M, N060516M, N060524M
Van €3980.00
Electric tapping machines with articulated arm VOLUMEC JOYTAP JT3
Made in Italy electric machines with Brushless motor and balanced articulated arm system entirely in aluminum which guarantees fast and precise alignment on the holes. All JOYTAP machines can be equipped with the VASTC or VASCT Industry 4.0 WI-FI Touch Screen Control (Optional) for semi-automatic tapping operations, controlled screwing, installation of self-tapping bushes and inserted threads, drilling and flaring operations.
Features:
- Articulated arm system with adjustable balance
- High performance IP65 motor, minimum noise and low consumption
- Wide regulation of the tapping speed
- Double anti-clockwise extraction speed settable at 100% or 50% of the maximum speed
- Joystick with control buttons that facilitates tool alignment and speeds up machining execution
- Balance and fluidity in movements guaranteed by adjustable gas springs and joints mounted on ball bearings
- Possibility of threading blind and through holes thanks to the adjustable clutches
Optional accessories:
- Volumec Assisted Screwing Tapping Control "VASTC"
- Depth sensor with automatic reverse
- Device for automatic tool lubrication
- GR2 - GR3 - GR4 quick change sockets for male holders
- GR2 quick change bushings - GR3 die holder
- GR2 quick change chucks for drill bits and countersinks
- GR2 quick change chucks for bit holders with 1/4" E connection
- GR2 quick change adapters for 1/4" - 3/8" - 1/2" socket wrenches
- GR2 quick change installers for self-tapping sockets
- Reduction bushes GR4>GR3 - GR3>GR2 - GR2>GR1
- Trolleys, benches or columns for tapping machines
Made in Italy electric machines with Brushless motor and balanced articulated arm system entirely in aluminum which guarantees fast and precise alignment on the holes. All JOYTAP machines can be equi...
Electric tapping machines with articulated arm VOLUMEC SNIPER 400
Compact and easy to handle Made in Italy electric tapper with 400 Watt Brushless motor, articulated aluminum supporting structure and control unit integrated inside the arm. The Sniper 400 is a machine with a wide range of tapping on multiple materials and can be set up with a fixed head for exclusively vertical machining, or with an adjustable head for vertical and inclined machining +/- 180°
Features:
- Articulated arm system with adjustable balance
- High performance IP65 motor, minimum noise and low consumption
- Wide regulation of the tapping speed
- Maximum anti-clockwise speed for rapid extraction of the tool
- Possibility of threading blind and through holes thanks to the adjustable clutches
Optional accessories:
- GR1 quick-change bushings for tap holders and die holders
- GR1 quick change chucks for bit holders and countersinks
- Depth sensor with automatic reverse
- Tapping trolley or bench