Zoeken
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
B-HANDLING
Toon als
Sorteren op
Tonen
per pagina
Slew limiter kit for B-HANDLING column mounted jib cranes SC, ACP, ACH
Slew limiter kit for column mounted jib cranes.
Features:
- Custom designed to limit the rotation of the jib for column-mounted cranes. SC, ACP, ACH
Advantages:
- Suitable for all columns
Supplied with:
- The fastenings and bolts necessary for coupling the crane to the column
M1430RAGG
Van €325.00
Slew limiter kit for B-HANDLING column mounted jib cranes SC, TC, RC, ACP, ACH
Slew limiter kit for column mounted jib cranes.
Features:
- Custom designed to limit the rotation of the jib for column-mounted cranes. SC, TC, RC, ACP, ACH.
Advantages:
- Suitable for all columns
Supplied with:
- The fastenings and bolts necessary for coupling the crane to the column
Features:
- Custom designed to limit the rotation of the jib for column-mounted cranes. SC, TC, RC, ACP, ACH.
Advantages:
- Suitable for all columns
Supplied with:
- The fastenings and bolts necessary for coupling the crane to the column
M1420CRAV
Van €315.00
Slew limiters for wall mounted jib cranes SM, TM, RM and AMP B-HANDLING
Slew limiter kit for wall mounted jib cranes.
Features:
- Custom designed to limit the rotation of the jib for wall mounted cranes mod. SM, TM, RM, AMP and AMH
Advantages:
- Suitable for all brackets
Supplied with:
- The fastenings and bolts necessary for attaching wall mounted jib crane
M1440MENS
Van €240.00
Stopbar device for trestles B-HANDLING
Stopbar device for round pieces, for trestles.
M81041000, M81042000
Van €74.00
Telescopic forkable cranes with forklift B-HANDLING
Telescopic forkable cranes with forklift.
Characteristics:
- High quality steel body and components
- Suitable for lifting and transporting parts using a hook
Benefits:
- Fixed positioning for continuous use
- Locking bracket for fast and safe application on the forks
- 360° rotatable hook
Equipment:
- Use and maintenance manual
M82200500, M82201000, M82201500
Van €4095.00
Telescopic tilting forklift cranes with forklift B-HANDLING
Telescopic tilting cranes, which can be forklifted with forklifts.
Characteristics:
- High quality steel body and components
- Suitable for lifting and transporting parts using a hook
Benefits:
- Fixed positioning for continuous use
- Locking bracket for fast and safe application on the forks
- 360° rotatable hook
Equipment:
- Use and maintenance manual
M82300500, M82301000, M82301500
Van €5691.00
Vacuum lifters B-HANDLING VACU-B
Vacuum lifters guided by an electric vacuum pump for lifting various types of material.
M301030PSF -Model with single pad flexible
M301030PS -Model with single pad rectangular
M301030PD -Model with double rectangular pad on 500 mm bar
M301030PO -Model with oval pad
M301035PTI -Model with round plate support in aluminum and gasket in silicone,
control handles in stainless steel AISI 304
M301060PD -Model with double rectangular pad on 500 mm bar
M301060PO -Model with oval pad
M3010100PQ -Model with quadruple rectangular pad. The distance between the individual
suction cups are adjustable on 2 bars of 600 mm mounted on a bar of 1800 mm.
Features:
- 3 Phase pump 380V 50HZ
- Bellows air lift
- Filter protection for the pump
- 13m vacuum tube
- Lifting speed with continuous regulation from 0 to 30/min
- Usefull vertical run 1700mm
- 360 ° Roating suspension head 360° incontinuous
Vacuum lifters guided by an electric vacuum pump for lifting various types of material.
M301030PSF -Model with single pad flexible
M301030PS -Model with single pad rectan...
M301030PSF, M3010100PQ, M301030PD, M301030PO, M301030PS, M301035PTI, M301060PD, M301060PO, M301050PV
Van €10482.00
Vacuum lifters B-HANDLING VACUJET SDPL
Model SDPL vacuum lifters with extremely high suction capacity and continuous vacuum generation.
Features:
- Suction plates suitable for constant loads and for use with porous surfaces such as wood, MDF and
chipboard
- Compressed air operated
- Custom beams designed to allow the position of the suction points to be changed
Advantages:
- Precise and safe load handling
- Possibility of handling variously shaped parts with a wide size range
- The system holds the raised load even in the event of a power failure thanks to the vacuum tank
Supplied with:
- Sound and light warning system if the vacuum plates are incorrectly
positioned on the piece to be lifted
- Shut-off valves at every suction point
- Use and maintenance manual
M3055SDPL0125, M3055SDPL0200
Van €2109.00
Vacuum lifters B-HANDLING VACUJET SDPM
Model SDPM vacuum lifters with extremely high suction capacity and continuous vacuum generation.
Features:
- Suction plates suitable for constant loads and for use with non-porous surfaces such as metal, glass, plexiglas and marble
- Compressed air operated
- Custom beams designed to allow the position of the suction points to be changed
Advantages:
- Precise and safe load handling
- Possibility of handling variously shaped parts with a wide size range
- The system holds the raised load even in the event of a power failure thanks to the vacuum tank
Supplied with:
- Sound and light warning system if the vacuum plates are incorrectly positioned on the piece to be lifted
- Shut-off valves at every suction point
- Use and maintenance manual
M3050SDPM0125, M3050SDPM0250, M3050SDPM0500, M3050SDPM1000, M3050SDPM1500
Van €3190.00
Wall mounted articulating jib cranes B_HANDLING
Wall mounted crane, AMP model with articulated arm and eyebolt connection, suitable for any type of hoist with suspension.
Features:
- Brake operated by cap springs, wear resistant
- Arm joint rotating on high quality ball bearings
- Finishing coat with anti-rust, two coats of water-soluble
paint,not suitable for external or particularly humid environments
Wall mounted crane, AMP model with articulated arm and eyebolt connection, suitable for any type of hoist with suspension.
Features:
- Brake operated by cap springs, wear ...
M1340P1252600, M1340P1254000, M1340P2002600, M1340P2004000, M1340P802600, M1340P804000
Van €2165.00
Wall mounted jib cranes with beam arm B-HANDLING
Wall mounted jib, TM model, with beam arm.
Features:
- Brakes operated by cap springs, wear resistant
- Finishing a coat of anti-rust, two coats of water-soluble paint,
not suitable for external or particular humid enviroments
Wall mounted jib, TM model, with beam arm. Features: - Brakes operated by cap springs, wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external ...
Features:
- Brakes operated by cap springs, wear resistant
- Finishing a coat of anti-rust, two coats of water-soluble paint,
not suitable for external or particular humid enviroments
M132010003000, M132010004000, M132010005000, M132010006000, M132015004000, M132015004500, M13202503000, M13202504000, M13202505000, M13202506000, M13202507000, M13202508000, M13205003000, M13205004000, M13205005000, M13205006000, M13205007000, ...
Van €1499.00
Wall mounted jib cranes with profile arm GIS SYSTEM KB B-HANDLING
Wall mounted jib crane, SM model with GIS KB system profile arm.
Features:
- Profile cold-rolled not bent without welds
- Brakes operated by cap springs, wear resistant
- Finishing a coat of anti-rust, two coats of water-soluble paint,
not suitable for external or particular humid enviroments
Wall mounted jib crane, SM model with GIS KB system profile arm.
Features:
- Profile cold-rolled not bent without welds
- Brakes operated by cap springs, wear...
M13100802000, M13100803000, M13100804000, M13100805000, M131010003000, M131010004000, M131010005000, M131010006000, M13101252000, M13101253000, M13101254000, M13101255000, M13101256000, M13101257000, M13101258000, M13102003000, M13102004000, ...
Van €823.00
Wall mounted overhead beam jib cranes B-HANDLING
Wall mounted jib, RC model, with overhead beam arm.
Features:
- Brakes operated by cap springs, wear resistant
- Finishing a coat of anti-rust, two coats of water-soluble paint,
not suitable for external or particular humid enviroments
Wall mounted jib, RC model, with overhead beam arm. Features: - Brakes operated by cap springs, wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for ...
Features:
- Brakes operated by cap springs, wear resistant
- Finishing a coat of anti-rust, two coats of water-soluble paint,
not suitable for external or particular humid enviroments
M133010003000, M133010004000, M133010005000, M133010006000, M133015004000, M133015005000, M13302503000, M13302504000, M13302505000, M13302506000, M13302507000, M13302508000, M13305003000, M13305004000, M13305005000, M13305006000, M13305007000, ...
Van €1279.00