Van Maele. FISCHER

Bolt anchor for cracked concrete and seismic applications FAZ II FISCHER The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably
simple and comfortable setting process.
The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (sismic).

Building materials
Approved for concrete C20/25 to C50/60, cracked. Concrete C20/25 to C50/60, non-cracked. Also suitable for concrete C12/15, natural stone with dense structure.

N823008010, N823008050, N823010010, N823010050, N823012010, N823012020, N823012030, N823012050, N823016025, N823016050, N823016100

Van €1.25

Bolt anchor zinc-plated steel for non-cracked concrete FBN II FISCHER The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.
The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Building materials
Approved for concrete C20/25 to C50/60, non cracked
Also suitable for concrete C12/15 and natural stone with dense structure

N822508005, N822508010, N822508020, N822508030, N822508050, N822510010, N822510020, N822510030, N822510050, N822510070, N822510100, N822512010, N822512020, N822512030, N822512050, N822516025, N822516050, ...

Van €0.75

Brass fixing PO FISCHER Dowel with knurled body for excellent adhesion to hole walls, shallow installation depth, simple for light installations and air ducts, metric thread, threaded rods, screws and all threaded accessories can be fitted. Building materials Concrete and natural stone with dense structure.

N821006, N821008, N821010, N821012

Van €0.58

Heavy-duty anchor for non-cracked concrete SLM with screw TE 8.8 zinc-plated FISCHER The optimized geometry minimizes setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing.
Thus the SLM is extremely flexible.
The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The red plastic cap protects against soiling and thus ensures free-running of the thread.

Zinc version with TE screw in steel 8.8.

Building materials
Approved for, concrete C20/25 to C50/60, non-cracked.
Also suitable for, concrete C12/15 natural stone with dense structure.

N822006, N822008, N822010, N822012

Van €1.72

Heavy-duty anchor TA M-S for medium loads with screw TE 8.8 zinc-plated FISCHER The optimized geometry minimise setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible. The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use. The red plastic cap protects against soiling and thus ensures free-running of the thread. Versions zinc-plated steel. Building materials Approved for concrete C20/25 to C50/60, noncracked, also suitable for concrete C12/15 natural stone with dense structure.

N821516, N821508, N821510, N821512

Van €1.69

Nylon anchor SX-S model with rim and screw Pozidriv FISCHER The 4-way expansion provides the optimum force distribution in the material, and offers high load-bearing capacities in solid and hollow building materials.
The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster.
The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation.
The greater anchorage depth of the SX means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster

Building materials
Concrete, vertically perforated brick, hollow block made from lightweight concrete, cavity floor slabs made of brick, concrete, perforated sand-lime brick, solid sand-lime brick, natural stone with dense structure, aerated concrete, solid panel made from gypsum, solid brick made from lightweight concrete, solid brick.

The price shown refers to a pack of 100 pieces

N820505, N820506, N820508, N820510

Van €17.83

Silicone cartridge gun FISCHER KPM 2 Model with rotating shell, suitable for standard silicone cartridges. Suitable for standard silicone cartridges.

J1310001

Van €49.90

Universal plug FU with rim and screw Pozidriv FISCHER The universal fixing FU is suitable for through and non-through installations. In solid building materials the screwing results in a complete expansion of the fastener against the hole wall, in perforated building materials the fastener body expands by undercutting into the cavity. Building materials Concrete, gypsum plasterboard and gypsum fibre boards, vertically perforated brick, hollow block made from lightweight concrete, cavity floor slabs made of brick, concrete, perforated sand-lime brick, solid sand-lime brick, aerated concrete. The price shown refers to a pack of 100 pieces

N82070635, N82070645, N820708, N820710

Van €31.82