Van Maele. KNIPEX

Cable shears KNIPEX 95 06 230 Shears for cutting single-core copper conductors with cross-section up to 16 mm², multipolar up to 50 mm² and thin wire up to 70 mm², not usable for steel wire or cold drawn copper cables, with contrast stop to prevent accidental cutting of the fingers. Adjustable screw joint, with return spring and pawl. Tempered stainless steel, Insulated coated handles with thermoplastic resin VDE tested, compliant with EC 60900 DIN EN 60900.

F2210230

Van €60.40

Cable shears KNIPEX 95 11 160 StepCut shears for cutting multipolar copper and aluminum cables with section up to 50 mm², not usable for steel wire and cold drawn copper cables. The shaped shape of the cutting edges allows an optimal cut without crushing with a much lower effort than standard shears of the same length. With contrast stop to avoid accidental pinching of fingers. Special tool steel tempered, forged and oil-hardened, handles coated with synthetic resin.

F2193160

Van €33.45

Cable shears KNIPEX 95 12 160 StepCut shears for cutting multipolar copper and aluminum cables with section up to 50 mm², not usable for steel wire and cold drawn copper cables. The shaped shape of the cutting edges allows an optimal cut without crushing with a much lower effort than standard shears of the same length. With contrast stop to avoid accidental pinching of fingers. Special tool steel tempered, forged and oil-hardened, handles coated in bi-component material.

F2194160

Van €38.10

Cable shears KNIPEX 95 12 165 Shears for cutting copper and aluminum cables, which can not be used for steel wire or cold drawn copper cables, cold, clean, cut without crushing. With contrast stop to avoid accidental finger crushing. Special steel for tempered, forged oil-hardened tools, handles coated in bi-componement material.

F2197165

Van €36.95

Cable shears KNIPEX 95 12 200 Shears for cutting copper and aluminum cables which can not be used for steel wire or cold drawn copper cables. Cold, clean cut without crushing, subdividing the cutting operation in the first cut (for Insulating sheath, in front area of the cutting edge) and finishing cut (for the conductor, in the rear area of the cutting edge) It is possible to cut cables up to 20 Ø with one single hand. With contrast stop to avoid accidental finger crushing. Special steel for tempered, forged, oil-hardened tools, handle coated in bi-component material.

F2198200

Van €60.10

Cable shears KNIPEX 95 12 500 Shears for cables with reduced weight to cut unipolar or multi-core copper and aluminum cables not usable for rope and steel wire Cold clean cut without crushing. With contrast stop to prevent accidental crushing of the fingers. Adjustable screw joint, stainless steel head. Chrome vanadium forged, oil-hardened, handles in highly resistant tubular aluminum, grip handles in bi-component material.

F2199500

Van €140.85

Cable shears VDE insulated 1000 Volt KNIPEX 95 16 160 StepCut shears for cutting multipolar copper and aluminum cables with section up to 50 mm², not usable for steel wire and cold drawn copper cables. The shaped shape of the cutting edges allows an optimal cut without crushing with a much lower effort than standard shears of the same length. With contrast stop to avoid accidental pinching of fingers. Special tool steel tempered, forged and oil-hardened, VDE-tested insulated handles made of two-component material, according to EC 60900 DIN EN 60900.

F2203160

Van €54.60

Cable strippers KNIPEX Shock-proof, synthetic resin body. Designed for round-section cable stripping, PVC, rubber, silicon, Ø 6 - 29 mm. PTFE.

F12686-29, F1268R1

Van €13.75

Combination pliers for electrians and cabling KNIPEX 13 02 160 Pliers for cabling work, for clamping and bending wires, for cutting hard and medium strength wire, with precision holes for stripping cables, for crimping socket terminals.Chrome-vanadium steel, forged and oil-hardened, precision cutting edges further tempered Induction hardness approx. 60 HRC handles coated in bi-component material.

F1218160

Van €42.65

Crimping pliers clamp type KNIPEX 97 00 215 A Crimping pliers with quick-release opening lever, strong clamping with minimum effort thanks to the articulated lever, reprodcuible crimping quality with automatic blaocking at the stall point to ensue high strength clamping, adjustable clamping pressure, special high resistant steel. Usage:  Pre-Insulated male and female terminals.

F1014215

Van €94.50

Crimping pliers for end sleeves KNIPEX 97 53 04 Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardened tempered steel, handles coated in bi-component material.

Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased cl...

F1035180

Van €180.35

Crimping pliers for end sleeves KNIPEX 97 53 08 Crimping pliers for end sleeves, DIN 46228 (part 1+4), Automatic adaptation to the size of the end sleeves, no climping errors using the wrong matrix, frontal Insertion of the sockets in the pincer, constant quality of crimping with force stop device (self-releasing mechanism). Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardend tempered steel, handles coated in bi-component material. Usage:  Square section pressing of end sleeves up to10 mm²  Possibility of Introducing laterally end sleeves up to 2,5 mm²  For all Twin end sleeves up to 2 x 4 mm² o 2 x AWG 10

F1030190

Van €183.05

Crimping pliers for end sleeves KNIPEX 97 53 09 Crimping pliers for end sleeves, DIN 46228 (part 1+4), Automatic adaptation to the size of the end sleeves, no climping errors using the wrong matrix, frontal Insertion of the sockets in the pincer, constant quality of crimping with force stop device (self-releasing mechanism). Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardend tempered steel, handles coated in bi-component material.

Crimping pliers for end sleeves, DIN 46228 (part 1+4), Automatic adaptation to the size of the end sleeves, no climping errors using the wrong matrix, frontal Insertion of the sockets in the pincer, ...

F1031190

Van €194.50

Crimping pliers for end sleeves KNIPEX 97 53 14 Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased clamping force from the articulated lever transmission. Chrome-vanadium oil-hardened tempered steel, handles coated in bi-component material.

Crimping pliers for end sleeves DIN 46228 (part 1+4), automatic adaptation to the size of the end sleeves, quality of constant crimping with force stop device (self releasing maechanism) Increased cl...

F1036180

Van €189.60

Crimping pliers for end sleeves KNIPEX 97 53 18 Crimping pliers for end sleeves Din 46228 (part 1 + 4), Square crimping profile, 360° rotating crimp matrix with 8 trip positions, automatic adaptation to the desired dimensions of the sleeves. Tightening of Twin sleeve terminals up to 2x6 mm² . Constant crimping quality with a forced stop device (self releasing mechanism). Tempered and oil-hardened vanadium chrome steel, handles coated in bi-component material.

Crimping pliers for end sleeves Din 46228 (part 1 + 4), Square crimping profile, 360° rotating crimp matrix with 8 trip positions, automatic adaptation to the desired dimensions of the sleeves. Tight...

F1038200

Van €200.65

Crimping pliers for end sleeves KNIPEX 97 61 145 A High resistant steel pliers for tightening socket terminals compliant with DIN 46228 (part 1+4) from 0,25 to 2,5 mm², tightening with trapezoldal profiles for a strong joint between conductor and terminal. Chrome-vanadium steel, forged oil-hardened resin coated handles. Usage:  For end sleeves (ferrules)

F1040145

Van €28.95