Van Maele. LOCTITE

Adhesive fabric-reinforced tapes LOCTITE Triple-layer highly tear resistant and waterproof up to four atmospheres, temperature resistant from -10°C to +70°C, suitable for high-sealing emergency repair. Silver.

N944050/50

Van €23.69

Adhesive primers for non-adhesive plastic LOCTITE SF 770 Specific for pre-treating difficult to bond plastic surfaces such as PP and PE polyolefins.

J0091010

Van €34.30

Anaerobic adhesive activator LOCTITE 7649 Acetone-based activator specific for all anaerobic adhesives. Increases the polymerization speed, particularly at temperatures lower than 15°C. Very useful in case of large bond gaps.

J0145500

Van €67.25

Applicator guns for epoxies LOCTITE 96001 For the continuous and automatic mixing of two-component structural adhesives. Suitable for epoxies, polyurethanes, acrylics, cyanoacrylates and modified silane polymers.

J1013050

Van €85.12

Bi-component epoxy quick adhesives charged with steel LOCTITE EA 3450 Two-component structural epoxy adhesive with rapid polymerization. The play filling capacity makes it ideal for repairing damaged metal parts.

- Operating temperature: -55 / +100 °C
- Fixing time: 15 min
- Peeling resistance: -
- Colour: Grey
- Repairs of metal parts

J1012025

Van €18.00

Bi-component epoxy quick adhesives LOCTITE EA 3430 Fast structural two-component epoxy adhesive. Impact and water resistant. Suitable for applications requiring a transparent joining line. Ideal for glass, decorative panels and general DIY applications.

- Working temperature: -55 / +100 °C.
- Fixing time: 15 min
- Peel resistance: 3 N/mm
- Colour: Ultra transparent
- For glass

J1011024

Van €18.95

Bi-component instant cyanoacrylate adhesives LOCTITE 3090 Instant, two-component, gel adhesive. Suitable for most surfaces. Suitable for filling up to 5 mm clearance. Without halos. Designed for general maintenance.

- Fixing time: 120 sec
- Operating temperature: -40 / +80 °C
- Gel
- Colorless
- Filling games

J0118010

Van €26.10

Bi-component tough epoxy adhesives with high viscosity LOCTITE EA 3425 Two-component structural epoxy adhesive with slow polymerization. Excellent for bonding metals and large surfaces. Thixotropic.

- Working temperature: -55 / +120 °C.
- Fixing time: 240 min
- Peel resistance: 1.5 - 2.5 N/mm
- Colour: Yellow/White
- For metals and large surfaces

J1010050

Van €28.05

Cleaner degreaser LOCTITE SF 7063 Multipurpose cleaner. Suitable for preparing components for the application of an adhesive or a sealant, can be used with metal, glass, rubber. Leaves no residue.

J3680010, J3680400

Van €27.75

Cleaning degreaser LOCTITE SF 7840 Multipurpose biodegradable cleaner. Suitable for removing grease, oil and dirt in general. Must be diluted in water. Solvent-free. Non-flammable.

J3515FL, J3515T

Van €13.00

Cyanoacrylate instant adhesives LOCTITE 406 Instant adhesive for rapid bonding of plastics and rubbers including elastomers and EPDM. For difficult bonding, e.g. with polyolefin plastics, use SF770 primer.

- Fixing time: 2 - 10 sec.
- Operating temperature: -40 / +120 °C
- Low viscosity
- Colorless
- For "difficult" rubbers and plastics

J0020020, J0020050, J0020500

Van €25.25

Cyanoacrylate instant adhesives LOCTITE 424 Instant adhesive for rapid bonding of plastics and rubbers including elastomers and EPDM. More viscous than 406. For difficult bonding, e.g. with polyolefin plastics use SF770 primer.

- Fixing time: 2 - 10 sec
- Operating temperature: -40 / +80 °C
- Low - Medium viscosity
- Colorless
- For "difficult" rubbers and plastics

J0025020, J0025500

Van €27.75

Cyanoacrylate instant adhesives LOCTITE 460 Instant adhesive for porous materials such as paper, wood, leather, cork and fabric.Practically odourless. Suitable for all those applications where the halo effect must be avoided. - Fixing time: 3 - 20 sec. - Operating temperature: -40 / +80 °C - Low viscosity - Colorless - Little halo and little smell

J0015020, J0015500

Van €26.80

Cyanoacrylate instant adhesives LOCTITE 495 Instant ethyl-based adhesive. For general use. Good performance on many substrates.

- Fixing time: 5 - 20 sec
- Operating temperature: -40 / +120 °C
- Low viscosity
- Colorless
- General use

J0070020, J0070050, J0070500

Van €26.00

Disinfectant LOCTITE SF 7080 HYGIEN SPRAY Non-toxic multi-purpose disinfectant. Eliminates bacterial, molds and fungi froms surfaces, contaminated objects and air conditioning systems. Medical Surgery Presidium. It neutralizes any unpleasant odor caused by microrganisms, acting specifically on the responsible subtrates and leaving a pleasant fragrance of eucalyptus and menthol.

J5110150

Van €12.80

Flange sealant with high mechanical strength LOCTITE 518 Anaerobic gel adhesive for sealing rigid cast iron and aluminium flanges. Thixotropic, semi-flexible.Approved for use in contact with food.

- Strength: Medium
- Service temperature range: -55 / +150 °C
- Max clearance: 0.3 mm
- Colour: Red
- Fixing time (steel): 25 min
- Fixing time (aluminium): 20 min
- NSF-P1 Certificate

J0144050, J0144300

Van €33.20