Rechercher
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
Fabric discs for surface treatment
Voir comme
Trier par
|
Discs for surface treatment in felt WODEX FELT
Felt flap discs with fibreglass backing plate.
Specifically designed for use with abrasive paste in surface mirror polishing. Use on angle grinders at 2500 rpm (16 m/s).
G1441115
Plus de détails
|
A partir de €10.34
|
|
Discs for surface treatment WODEX CLEAN TNT
Non-woven disc impregnated with abrasive silicon carbide granules on a fibreglass backing plate.
Open mesh for improved removal of material without clogging. May be cleaned using compressed air. Low noise. No contaminants released. Can be used on all materials. Use on angle grinders at 8,300 rpm (50 m/s).
G1431115
Plus de détails
|
A partir de €6.99
|
|
Discs for surface treatment WODEX POLISH TNT
Non-woven disc impregnated with abrasive grit on a fibreglass backing plate.
Close mesh allows minor imperfections left by flap discs to be removed for a perfect mirror finish. Low noise, highly recommended for machining stainless steel and suitable for all other ferrous surfaces, as well as plastic, wood, marble and glass or on all surfaces where a superior finishing is required. Use on angle grinders at a speed of 8300 rpm (50 m/s).
G1421115
Plus de détails
|
A partir de €14.17
|
|
Discs for surface treatment WODEX SURFACE TNT
Non-woven flap discs with fibreglass backing plate.
Special Nylon thread flaps impregnated with abrasive grit ensure consistent finishing throughout the entire process. Low noise. Allows a high degree of finish to be obtained on iron, stainless steel, aluminium, titanium, fibreglass, non-ferrous materials, plastics, paints and lacquers. The level of finish depends on the type of disc chosen. Use on angle grinders at 10,400 rpm (63 m/s)
G1426115C, G1426115M, G1426115VF
Plus de détails
|
A partir de €10.72
|
|
TYROLIT UNITIZED non-woven fabric discs
Untized discs, obtained from pressed layers of non-woven fabric, guarantee an excellent surface finish,cold grinding, reduced clogging and long life. The 3SF version in Silicon Carbide is more flexible and suitable for small burrs, cleaning of welding traces and polishing. The more rigid and agrresive 6AM version in Aluminum Oxide is suitable for burrs and bevels even on edges. 22.23 mm hole for use on angle grinders. Max speed 10,000 RPM - Recommended 5,000RPM
G144512763SF, G144512766AM
Plus de détails
|
A partir de €19.26
|