Rechercher
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
Maschiatrici elettriche
Voir comme
Trier par
|
Assisted control for screwing and tapping VOLUMEC VASTC - VASTC-4.0 WI-FI
All JOYTAP machines can be equipped with Touch Screen Control
VASTC or VASTC Industry 4.0 WI-FI for semi-automated tapping operations,
controlled screwing, installation of self-tapping bushes and inserted threads.
TAPPING:
- Semi-automatic tapping (pitch setting - depth - speed - torque Nm).
- Manual tapping (speed setting - torque Nm).
- Constant speed and torque during tapping thanks to the control encoder.
- Simplified programming using the integrated interface.
- Counting of the threads made.
- Data archive for later reuse.
SCREWING:
- Screwing with Automatic Stop (when the preset torque is reached).
- Luminous signal at the end of the tightening.
- Centering system before screwing.
- Simplified programming using the integrated interface.
- Constant speed and torque during screwing thanks to the control encoder.
- Counting of the tightenings performed.
- Data archive for later reuse.
N061200, N061240
Plus de détails
|
A partir de €1250.00
|
|
Assisted control for screwing and tapping VOLUMEC VASTC-1 - VASTC-4.0-1 WI-FI
All JOYTAP machines can be equipped with VASTC or VASTC-4.0 WI-FI Touch Screen Control for semi-automatic tapping operations, controlled screwing, installation of self-tapping bushes and inserted threads.
TAPPING:
- Semi-automatic tapping (pitch setting - depth - speed - torque Nm).
- Manual tapping (speed setting - torque Nm).
- Constant speed and torque during tapping thanks to the control encoder.
- Simplified programming using the integrated interface.
- Counting of the threads made.
- Data archive for later reuse.
SCREWING:
- Screwing with Automatic Stop (when the preset torque is reached).
- Luminous signal at the end of the tightening.
- Centering system before screwing.
- Simplified programming using the integrated interface.
- Constant speed and torque during screwing thanks to the control encoder.
- Counting of the tightenings performed.
- Data archive for later reuse.
N061400, N061440
Plus de détails
|
A partir de €1750.00
|
|
Automatic tool lubrication system for electric tappers VOLUMEC LST01
The automatic lubrication system is activated autonomously at each tapping cycle, lubricating the tool in the desired quantity. The device can be installed (by the manufacturer) on all Joytap tapping machines.
N061800
Plus de détails
|
A partir de €650.00
|
|
Bushes for electric tappers with hexagonal bit holder 1/4" VOLUMEC MPAE1/4
Bushes Size 2 with bit holder for 1/4 "hexagonal shank bits to DIN ISO 1173-C 6.3
N065014
Plus de détails
|
A partir de €147.00
|
|
Bushes for electric tapping machines with drill chuck VOLUMEC MPS10GR1 - MPS13GR1
Size 1 bushes with drill chuck and countersinks
N064610, N064613
Plus de détails
|
A partir de €161.00
|
|
Bushes for electric tapping machines with drill chuck VOLUMEC MPS10GR2 - MPS13GR2
Size 2 bushes with drill chuck and countersinks
N064810, N064813
Plus de détails
|
A partir de €161.00
|
|
Bushes for tapping with adjustable clutch VOLUMEC BFGR1
Size 1 bushes with adjustable clutch for DIN371 M2 to M10 and DIN376 M12 to M16 taps.
N063002, N063003, N063004, N063005, N063006, N063008, N063010, N063012, N063014, N063016
Plus de détails
|
A partir de €58.00
|
|
Bushes for tapping with adjustable clutch VOLUMEC BFGR2
Size 2 bushes with clutch for DIN371 taps from M3 to M10 and DIN376 from M12 to M30.
N063203, N063204, N063205, N063206, N063208, N063210, N063212, N063214, N063216, N063218, N063220, N063222, N063224, N063227, N063230
Plus de détails
|
A partir de €74.00
|
|
Bushes for tapping with adjustable clutch VOLUMEC BFGR4
Size 4 bushes with clutch for DIN376 M18 to M48 taps.
N063618, N063620, N063622, N063624, N063627, N063630, N063633, N063636, N063639, N063642, N063645, N063648
Plus de détails
|
A partir de €330.00
|
|
Bushes with adjustable clutch VOLUMEC BFGR3
Size 3 bushes with clutch for DIN376 M20 to M36 taps.
N063420, N063422, N063424, N063427, N063430, N063433, N063436
Plus de détails
|
A partir de €185.00
|
|
Electric depth sensor for electric tappers VOLUMEC EDS01
Electronic sensor with automatic tool return after reaching the predetermined working depth. The electronic depth sensor can be installed (by the manufacturer) on all Sniper and Joytap tappers.
N061600
Plus de détails
|
A partir de €435.00
|
|
Electric tapping machine trolley VOLUMEC MCA001
Trolley for Sniper and Joytap tapping machines complete with shelf for sockets.
N062000
Plus de détails
|
A partir de €750.00
|
|
Electric tapping machines with articulated arm VOLUMEC JOYTAP JT2
Made in Italy electric machines with Brushless motor and balanced articulated arm system entirely in aluminum that guarantees fast and precise alignment on the holes. All JOYTAP machines can be equipped with the VASTC or VASCT Industry 4.0 WI-FI Touch Screen Control (Optional) for semi-automatic tapping operations, controlled screwing, installation of self-tapping bushes and inserted threads, drilling and countersinking operations.
Features:
- Articulated arm system with adjustable balance
- IP65 high performance motor, minimum noise and low consumption
- Wide adjustment of the tapping speed
- Double counter-clockwise extraction speed that can be set at 100% or 50% of the maximum speed
- Joystick with control buttons that facilitates tool alignment and speeds up the execution of machining
- Balance and fluidity in movements guaranteed by adjustable gas springs and joints mounted on ball bearings
- Possibility to thread blind and through holes thanks to the adjustable clutches
Optional accessories:
- Volumec Assisted Screwing Tapping Control "VASTC"
- Depth sensor with automatic inversion
- Device for automatic tool lubrication
- GR2 - GR3 - GR4 quick change bushes for taps
- GR2 - GR3 quick change die holders
- GR2 quick change chucks for drills and countersinks
- Quick change chucks GR2 insert holder with 1/4 "E connection
- GR2 quick change adapters for 1/4 "- 3/8" - 1/2 "sockets
- GR2 quick change installers for self-tapping bushes
- Reduction sleeves GR4> GR3 - GR3> GR2 - GR2> GR1
- Trolleys, benches or tapping columns
N060512M, N060516M, N060524M
Plus de détails
|
A partir de €3980.00
|
|
Electric tapping machines with articulated arm VOLUMEC JOYTAP JT3
Made in Italy electric machines with Brushless motor and balanced articulated arm system entirely in aluminum which guarantees fast and precise alignment on the holes. All JOYTAP machines can be equipped with the VASTC or VASCT Industry 4.0 WI-FI Touch Screen Control (Optional) for semi-automatic tapping operations, controlled screwing, installation of self-tapping bushes and inserted threads, drilling and flaring operations.
Features:
- Articulated arm system with adjustable balance
- High performance IP65 motor, minimum noise and low consumption
- Wide regulation of the tapping speed
- Double anti-clockwise extraction speed settable at 100% or 50% of the maximum speed
- Joystick with control buttons that facilitates tool alignment and speeds up machining execution
- Balance and fluidity in movements guaranteed by adjustable gas springs and joints mounted on ball bearings
- Possibility of threading blind and through holes thanks to the adjustable clutches
Optional accessories:
- Volumec Assisted Screwing Tapping Control "VASTC"
- Depth sensor with automatic reverse
- Device for automatic tool lubrication
- GR2 - GR3 - GR4 quick change sockets for male holders
- GR2 quick change bushings - GR3 die holder
- GR2 quick change chucks for drill bits and countersinks
- GR2 quick change chucks for bit holders with 1/4" E connection
- GR2 quick change adapters for 1/4" - 3/8" - 1/2" socket wrenches
- GR2 quick change installers for self-tapping sockets
- Reduction bushes GR4>GR3 - GR3>GR2 - GR2>GR1
- Trolleys, benches or columns for tapping machines
N061012M, N061016M, N061024M, N061036M, N061036SM, N061048SM
Plus de détails
|
A partir de €4480.00
|
|
Electric tapping machines with articulated arm VOLUMEC SNIPER 400
Compact and easy to handle Made in Italy electric tapper with 400 Watt Brushless motor, articulated aluminum supporting structure and control unit integrated inside the arm. The Sniper 400 is a machine with a wide range of tapping on multiple materials and can be set up with a fixed head for exclusively vertical machining, or with an adjustable head for vertical and inclined machining +/- 180°
Features:
- Articulated arm system with adjustable balance
- High performance IP65 motor, minimum noise and low consumption
- Wide regulation of the tapping speed
- Maximum anti-clockwise speed for rapid extraction of the tool
- Possibility of threading blind and through holes thanks to the adjustable clutches
Optional accessories:
- GR1 quick-change bushings for tap holders and die holders
- GR1 quick change chucks for bit holders and countersinks
- Depth sensor with automatic reverse
- Tapping trolley or bench
N060016M, N060016SM
Plus de détails
|
A partir de €3297.00
|
|
Reduction sleeves for electric tapping machines VOLUMEC BRGR
Reduction sleeves for Joytap tapping machines
N063821, N063832, N063843
Plus de détails
|
A partir de €80.00
|
|
Trolley for electric tapping machines with aluminum top VOLUMEC MCA001
Joytap tapping machine trolley with structural aluminum top and slots for fixing accessories to block pieces.
N062200
Plus de détails
|
A partir de €815.00
|
|
Trolleys for tapping machines
Trolleys with support column for tapping machines or manipulators
|
|
|
Workbenches with T-slots for electric tapping machines VOLUMEC BML001-BML001-R
Sniper and Joytap tapping machine bench with 30 mm thick steel worktop and T-slots for fixing piece-locking accessories.
N062400, N062400R
Plus de détails
|
A partir de €1715.00
|