Rechercher
Anaerobic adhesive activator LOCTITE 7649
Acetone-based activator specific for all anaerobic adhesives.
Increases the polymerization speed, particularly at temperatures lower than 15°C.
Very useful in case of large bond gaps.
J0145500
Plus de détails
|
A partir de €67.25
|
Black silicone gasketing AREXONS 0094
RTV silicone with acetic cross-linking, thixotropic. Suitable for all automotive uses and wherever a sealing gasket is necessary. It resists temperatures from -70°C to +250°C with peaks of 300°C. Fast polymerization. Shore-A hardness 24. Colour Black.
J1353060
Plus de détails
|
A partir de €20.00
|
Coarse threaded sealants LTEC
Anaerobic sealant adhesive for threaded fitting with medium strength and high viscosity. It can be taken apart. Specific for inaccurate threads typical of gas, water and steam fittings. The viscosity of the product contributes to the sealing of the gaps.
- Maximum diameter: 2"
- Operating temperature: from -50 to + 150°C
- Certification: NSF - DVGW
J0175050
Plus de détails
|
A partir de €13.40
|
Flange sealant with high mechanical strength LOCTITE 518
Anaerobic gel adhesive for sealing rigid cast iron and aluminium flanges. Thixotropic, semi-flexible.Approved for use in contact with food.
- Strength: Medium - Service temperature range: -55 / +150 °C - Max clearance: 0.3 mm - Colour: Red - Fixing time (steel): 25 min - Fixing time (aluminium): 20 min - NSF-P1 Certificate
J0144050, J0144300
Plus de détails
|
A partir de €33.20
|
Flange sealant with medium mechanical strength LOCTITE 573
Anaerobic paste adhesive for use on rigid and machined flanges. Low resistance, specific where slow polymerization is required.
- Resistance: Low - Operating temperature: -55 / +150 °C - Max clearance: 0.1 mm - Color: Green - Fixing time (steel): 9 hours - Fixing time (aluminium): 12 hours
J0142050, J0142250
Plus de détails
|
A partir de €31.45
|
Flange sealants for high temperatures LOCTITE 510
Anaerobic paste adhesive for use on rigid flanges. High thermal and chemical resistance. Ideal for application on vertical surfaces. Approved for use in the food industry.
- Resistance: Medium - Operating temperature: -55 / +200 °C - Max clearance: 0.25 mm - Color: Pink - Fixing time (steel): 25 min - Fixing time (aluminium): 45 min - NSF-P1 Certificate
J0141050, J0141250
Plus de détails
|
A partir de €33.55
|
Gasket mastics AREXONS 0019
Suitable for positioning and fixing all types of traditional gaskets, resistant to coolant, oil, petrol and pressure.
J1340200
Plus de détails
|
A partir de €20.10
|
Liquid gasket AREXONS 0012
Liquid natural rubber gaskets for mechanical couplings. Resistant to water, mineral oils, fuel, diluted acids and greases. It resists temperatures from -20°C to +110°C.
J1345065
Plus de détails
|
A partir de €12.50
|
LOCTITE dosing needle kit
Dosing needles kit . Contains 2 needles of each type of the J0147 range.
J0148KIT
Plus de détails
|
A partir de €59.68
|
LOCTITE dosing needles
Loctite dosing needles for correct and precise despensing of the product.
PPF - Flexible dosing Tips in polypropylene PPC - Conical dosing Tips in polypropylene SSS - Stainless Steel Tips
J0147025F, J0147061F, J0147084F, J0147137F, J0147041P, J0147061P, J0147084P, J0147119P, J0147025S, J0147061S, J0147084S, J0147137S
Plus de détails
|
A partir de €66.73
|
Manual threadlocker LOCTITE PRO PUMP
Manual dispenser for 50 and 250ml bottles of thread locker. Adjustable nozzel in 3 positions. Guarantees precision and cleanliness of the application. Speeds up adhesive positioning operations and reduces product waste.
J0149001
Plus de détails
|
A partir de €74.66
|
Multifuntion 4 in 1 maintenance LTEC MR041
Medium/high strength, high viscosity, thixotropic multifunction anaerobic adhesive. MR041 features a pump dispenser for precise dosing. This product is suitable for sealing flanges and fittings, braking screws and nuts, as well as locking cylindrical couplings. Product specifically designed for industrial maintenance.
- Amplitude of play: from 0.1 to 0.2 mm
- Operating time: -50 to + 150° C
- Colour Green
- Certifications: NSF - DVGW
J0190050
Plus de détails
|
A partir de €13.40
|
Multipurpose flange sealants LOCTITE 574
Anaerobic paste adhesive, ideal for use on rigid metal parts such as iron moulds and pump housings.
- Resistance: Medium
- Operating temperature: -55 / +150 °C
- Max clearance: 0.25 mm
- Color: Orange
- Fixing time (steel): 15 min
- Fixing time (aluminium): 45 min
J0143050
Plus de détails
|
A partir de €32.05
|
Multi-purpose spray adhesive LTEC SPRAYGLUE
Spray glue is a non-reusable multi-purpose spray adhesive.
Ideal for many types of gluing, It can withstand up to 200°C Suitable for bonding paper, cardboard, wood, fabrics, leather, plastic, glass, fibers, rock wool and absorbent materials.
J1330400
Plus de détails
|
A partir de €5.79
|
Non-metallic thixotropic anaerobic pastes LOCTITE QUICK METAL 660
Ideal for repairing worn coaxial couplings. Allows you to restore bearing seats or keyways. Suitable for filling clearances up to 0.5 mm using the activator SF7649. Approved for use in a food processing environment.
- Resistance: High
- Operating temperature: -55 / +150 °C
- High viscosity
- Colour: Silver
- Max. diametrical clearance: 0.5 mm
- To repair very worn coaxial couplings
- NSF-P1 Certificate
J1015050
Plus de détails
|
A partir de €55.70
|
Peristaltic hand pumps LOCTITE 98414-97001
Manual dispensers. They are easily screwed onto all bottles of Loctite anaerobic, threadlocker, thread sealer and blockers of 50 and 250 ml. Designed to dose drops from 0.01 to 0.04 ml of product from every angle without loss or waste. Suitable for low and medium viscosity products.
J0146001, J0146002
Plus de détails
|
A partir de €211.19
|
Polyurethane sealants NPT U SEAL 500
High-performance sealing adhesive. Suitable for bonding various materials such as steel, sheets, painted surfaces and plastics. Good UV resistance, does not swell or shrink. Sandable and paintable after the film has formed.
J1123500B, J1123500N
Plus de détails
|
A partir de €7.30
|
Quick epoxy compounds LOCTITE EA 3463 METAL MAGIC STEEL
Two-component epoxy in kneadable stick format loaded with steel. Adheres on wet surfaces and polyerizes in water. Resistant to chemicals. Can be drilled, sanded and painted.
- Operating temperature: -30 / +120 °C. - Fixing time: 10 min - For leaks in pipes and tanks. Repairing small cracks
J1014114
Plus de détails
|
A partir de €24.50
|
Red silicone auto-leveling gasketing in cartridge AREXONS RS01
RTV silicone with acetic cross-linking, auto-levelling. Suitable for the formation of seals for mechanical couplings operating in difficult conditions. It resists temperatures from -70°C to +250°C with peaks of 300°C. Vulcanizes at room temperature, excellent resistance to water, humidity and oils. Shore hardness-A 50.
J1351300R
Plus de détails
|
A partir de €71.80
|
Red silicone auto-leveling gasketing in tube AREXONS 0096
RTV silicone with acetic cross-linking, auto-levelling. Suitable for making gaskets for mechanical couplings that operate in difficult conditions, resistant to high temperatures (-70°C +250°C) with peaks of up to 300°C. Vulcanizing at enviroment temperture, excellent resistance to water, mmoisture and oil. Shore-A hardness 50. Colour Red.
J1350060
Plus de détails
|
A partir de €19.90
|
Red silicone auto-leveling gasketing LOCTITE 596
Suitable for flexible assembly and sealing with clearance up to 8 mm, resistant to high temperatures (-55°C +250°C).
J1347080
Plus de détails
|
A partir de €14.15
|
Retainers for cylinder couplings LTEC BC8
High strength anaerobic blocker, medium viscosity, resistant to high temperatures. Suitable for fixing bearings, gears, rotors and coaxial couplings in general.
- Gap filling: 0.05 to 0.15 mm
- Operating time: -50 to +180°C
- Colour: green
J0180050
Plus de détails
|
A partir de €18.40
|
Retainers for cylindrical couplings LOCTITE 603
Suitable for locking tight cylindrical couplings where a penetrating action is required. Low viscosity. High tensile strength. Oil impregnated applications.
- Resistance: High - Operating temperature: -55 / +150 °C - Low viscosity - Color: Green - Max. diametrical clearance: 0.1 mm - NSF-P1 Certificate
J0136050, J0136250
Plus de détails
|
A partir de €50.10
|
Retainers for cylindrical couplings LOCTITE 638
High thermal resistance product suitable on all metals including corrosion resistant metals such as aluminium, steel and galvanized surfaces. Suitable for drive shafts, gears, pulleys and other cylindrical parts. Approved for gas, drinking water and food environment.
- Resistance: High - Operating temperature: -55 / +180 °C - Medium viscosity - Color: Green - Max. diametrical clearance: 0.25 mm - Approval: DVGW, WRAS, NSF
J0137050, J0137250
Plus de détails
|
A partir de €51.00
|