Zoeken
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
LANDOIL
Toon als
Sorteren op
Tonen
per pagina
Neat cutting fluid LANDOIL Mirzan
Mirzan is a neat cutting fluid based on synthetic esters and antioxidant additives.
The product is designed for universal use during heavy-duty work on all materials.
Excellent in turning and milling, its formulation fully protects the health of the operator.
It has an outstanding detergency power, and is free of mineral oils, chlorinated compounds, PCB/PCT.
: High flash point : Low volatility : High tool performance : Very oxidation-stable : Does not stain yellow metals
The product is designed for universal use during heavy-duty work on all materials.
Excellent in turning and milling, its formulation fully protects the health of the operator.
It has an outstanding detergency power, and is free of mineral oils, chlorinated compounds, PCB/PCT.
H11680025, H11680005, H11680200
Van €55.00
Neat cutting fluid LANDOIL Mirzan EP
Mirzan EP is a neat synthetic ester-based fluid that is completely free of mineral oils.
The product has been formulated with special antiwear and EP additives that make it suitable for use during very heavy duty work on variously alloyed steels, tool steels and stainless steels, aluminium alloys and yellow metals.
It has extraordinary lubrication power, a high service life and high EP power due to its viscosity.
: High flash point : Low volatility : High tool performance : Very oxidation-stable : Does not stain yellow metals
The product has been formulated with special antiwear and EP additives that make it suitable for use during very heavy duty work on variously alloyed steels, tool steels and stainless steels, aluminium alloys and yellow metals.
It has extraordinary lubrication power, a high service life and high EP power due to its viscosity.
H11657220025, H11657220200, H11657150025, H11657300025, H11657300200, H11657150200
Van €132.50
Neat cutting fluid LANDOIL Mirzan S
Mirzan S is a neat fluid based on synthetic esters that ensure exceptionally low atomization and a high flash point.
The product has been designed to be universally used during heavy-duty work on steels, aluminium alloys and yellow alloys. Excellent in turning and grinding, its formulation fully protects the health of the operator.
It has an outstanding detergency power, a high service life and an important anti-welding power in view of its viscosity.
: High flash point : Low volatility : High tool performance : Very oxidation-stable : Does not stain yellow alloys : High ageing resistance
The product has been designed to be universally used during heavy-duty work on steels, aluminium alloys and yellow alloys. Excellent in turning and grinding, its formulation fully protects the health of the operator.
It has an outstanding detergency power, a high service life and an important anti-welding power in view of its viscosity.
H1161705025, H1161705200, H1161708025, H1161708200
Van €142.50
Neat cutting oil LANDOIL SYNTOFORM
SYNTOFORM is a neat cutting oil produced from renewable bases, suitable for tapping, broaching, slotting, drilling of any type of difficult-to-work material.
SYNTOFORM cutting oil has been designed and formulated to have maximum ease of use and the highest safety characteristics, while maximizing product performance.
SYNTOFORM, thanks to its exceptional EP qualities, adheres to the surface of the tool so as to maximize cutting capabilities even under high stress.
SYNTOFORM cutting oil has been designed and formulated to have maximum ease of use and the highest safety characteristics, while maximizing product performance.
SYNTOFORM, thanks to its exceptional EP qualities, adheres to the surface of the tool so as to maximize cutting capabilities even under high stress.
H13210500, H13210005
Van €21.00
Oxygenator for emulsions LANDOIL OXI COOLER
OXI COOLER is a system for oxygenating and cooling emulsions. Very simple to use.
Once the bubbler tubes are inserted in the bottom of the tank, simply connect the device to the compressed air.
The simple model with a single bubbler is combined with a Delta 40 cooler and is supplied with a neodymium magnet to be secured to a metal wall.
The maxi model with triple bubbler is driven by a Delta 40 Turbo Kompact and is supplied with a bracket to support the system consisting of cooler, solenoid valve and control unit.
ADVANTAGES:
- Longer emulsion life without added chemicals
- Optimises tool performance
- Elimination of odours caused by the metabolism of microorganisms
- Maintains pH at an optimal level
- Fights bacterial proliferation
- Reduced production of fumes and mists
- Reduces disposal costs
Once the bubbler tubes are inserted in the bottom of the tank, simply connect the device to the compressed air.
The simple model with a single bubbler is combined with a Delta 40 cooler and is supplied with a neodymium magnet to be secured to a metal wall.
The maxi model with triple bubbler is driven by a Delta 40 Turbo Kompact and is supplied with a bracket to support the system consisting of cooler, solenoid valve and control unit.
ADVANTAGES:
- Longer emulsion life without added chemicals
- Optimises tool performance
- Elimination of odours caused by the metabolism of microorganisms
- Maintains pH at an optimal level
- Fights bacterial proliferation
- Reduced production of fumes and mists
- Reduces disposal costs
H3267001, H3267003
Van €327.00
Pasta per maschiatura LANDOIL HI-THREAD
HI-THREAD paste is specially designed for use in tapping, threading and drilling of any type of material, and thanks to its high adhesive qualities, it guarantees high protection of the tool.
The high adhesive capacity of HI-THREAD paste allows perfect lubrication of the tool in any input position.
The product, with additive of high EP components, guarantees maximum lubrication even under high stress and difficult-to-machine materials.
The high adhesive capacity of HI-THREAD paste allows perfect lubrication of the tool in any input position.
The product, with additive of high EP components, guarantees maximum lubrication even under high stress and difficult-to-machine materials.
H13270500
Van €22.00
Sanitizing detergent for machine tools LANDOIL WHAMEX
WHAMEX is successfully used when the emulsion has to be replaced during operation and it is necessary to disinfect as well as clean effectively.
Used at the recommended concentration, it removes accumulated dirt from the system and pipes, making cleaning easier. When introduced into the system, work can continue as it does not interfere with working conditions.
METHOD OF USE
- Introduce WHAMEX at 1-3% in the emulsion to be replaced 24 h before emptying
- Work normally or circulate the system
- Empty and remove all residues manually
- Rinse if possible
- Introduce new emulsion at the indicated concentration into the system
H35110005, H35110025
Van €46.75
Silicone Defoamer LANDOIL DEFOAMER TK-100
DEFOAMER TK-100 is a siloxane-modified defoamer designed primarily for use in a wide variety of metalworking emulsions with a long-lasting defoaming effect.
The properties and performance of an antifoam agent are highly dependent on the specific formulation in which it is used and, therefore, should always be tested (possibly at different treatment levels, temperatures and/or time intervals) prior to use.
An initial dosage level of 0.01 to 0.50 per cent of the emulsion volume in the tank is recommended.
Always stir before use as the product tends to separate slightly.
Stir the product and repeat the quality test one year after the date of manufacture.
Defoamer-TK-100 is washable according to typical industrial washing and rinsing procedures, so that the subsequent paintwork, after washing, is free of defects.
The properties and performance of an antifoam agent are highly dependent on the specific formulation in which it is used and, therefore, should always be tested (possibly at different treatment levels, temperatures and/or time intervals) prior to use.
An initial dosage level of 0.01 to 0.50 per cent of the emulsion volume in the tank is recommended.
Always stir before use as the product tends to separate slightly.
Stir the product and repeat the quality test one year after the date of manufacture.
Defoamer-TK-100 is washable according to typical industrial washing and rinsing procedures, so that the subsequent paintwork, after washing, is free of defects.
H35470005
Van €318.00
Universal greases LTEC HYDROGREASE AL
HYDROGREASE AL is a lubricating grease based on highly refined mineral oils and aluminum complexes.
The product is indicated for greasing parts that operate in unfavorable environmental conditions due to the presence of water or humidity. HYDROGREASE AL is a mud-resistant lubricating grease and is recommended for chassis, parts of cars and industrial vehicles subjected to the washing away action of water or atmospheric agents of any kind.
The product is indicated for greasing parts that operate in unfavorable environmental conditions due to the presence of water or humidity. HYDROGREASE AL is a mud-resistant lubricating grease and is recommended for chassis, parts of cars and industrial vehicles subjected to the washing away action of water or atmospheric agents of any kind.
H2211AL218, H2211AL25
Van €82.50
Universal greases LTEC MULTIGREASE MP
MULTIGREASE MP are excellent quality, multipurpose greases based on lithium hydroxysterate with EP characteristics. These greases can be used for the lubrication of flat or rolling bearings, industrial, construction, road machinery and, in general, when operating conditions with high speeds, high temperatures and the presence of water occur at the same time. They have excellent resistance to oxidation and exceptional mechanical stability; they do not soften or harden even if exposed to heavy exercise loads for a long time.
The product is designed to be used with J4165 air pumps, available on page J.37 up to NLGI 2 viscosity grade.
The product is designed to be used with J4165 air pumps, available on page J.37 up to NLGI 2 viscosity grade.
H2201MP0018, H2201MP118, H2201MP218, H2201MP318, H2201MP018
Van €204.48
Water-Miscible Metalworking Fluid LANDOIL Futura S UNI
Futura S UNI is a water-miscible metalworking fluid based on esters derived from renewable resources.
It is free of chlorine, boron, bactericides and nitrosatable amines.
Futura S UNI is a universal metalworking fluid designed to be used in medium-duty machining operations and grinding of all materials: steels, stainless steels, titanium, aluminium alloys, yellow alloys and cast iron. The formulation has an exceptionally high balance between lubricity and detergency, which makes it an extremely versatile product in all types of processing.
It produces a very stable translucent emulsion in water.
Its characteristics make it suitable for use with all types of water, both hard and soft.
Bases: Ester Classification: UNI Removal: Grinding: EP: - : Universal product : Ester based : Biocide-free : Boron free
It is free of chlorine, boron, bactericides and nitrosatable amines.
Futura S UNI is a universal metalworking fluid designed to be used in medium-duty machining operations and grinding of all materials: steels, stainless steels, titanium, aluminium alloys, yellow alloys and cast iron. The formulation has an exceptionally high balance between lubricity and detergency, which makes it an extremely versatile product in all types of processing.
It produces a very stable translucent emulsion in water.
Its characteristics make it suitable for use with all types of water, both hard and soft.
H02130025, H02130200
Van €215.00
Water-Miscible Metalworking Fluid LANDOIL Futura UNI
Futura S UNI is a water-miscible metalworking fluid based on esters derived from renewable resources.
It is free of chlorine, boron, bactericides and nitrosatable amines.
Futura S UNI is a universal metalworking fluid designed to be used in medium-duty machining operations and grinding of all materials: steels, stainless steels, titanium, aluminium alloys, yellow alloys and cast iron. The formulation has an exceptionally high balance between lubricity and detergency, which makes it an extremely versatile product in all types of processing.
It produces a very stable translucent emulsion in water.
Its characteristics make it suitable for use with all types of water, both hard and soft.
Bases: Ester Classification: UNI Removal: Grinding: EP: - : Universal product : Ester based : Biocide-free : Boron free
Water-Miscible Metalworking Fluid LANDOIL Multifluid E POWER
Multifluid E POWER is a semi-synthetic water miscible metalworking fluid with a high active part content, based on highly refined mineral oils and special synthetic additives. It is free of chlorine, bactericides and nitrosatable amines.
Multifluid E POWER is a metalworking fluid specifically designed for use in medium to heavy machining operations on steels, stainless steels, titanium, aluminium alloys and cast iron. It can also be used in grinding due to its good foam control. In water it produces a very stable Milky emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft.
Bases: Minerals Classification: POWER Removal: Grinding: EP: - : Heavy duty product : High mineral oil content : Biocide-free : Excellent performance on aluminium
Multifluid E POWER is a metalworking fluid specifically designed for use in medium to heavy machining operations on steels, stainless steels, titanium, aluminium alloys and cast iron. It can also be used in grinding due to its good foam control. In water it produces a very stable Milky emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft.
H00310025, H00310200
Van €197.50
Water-Miscible Metalworking Fluid LANDOIL Multifluid E POWER EP
Multifluid E POWER EP is a semi-synthetic, water miscible metalworking fluid with a high active part content, based on highly refined mineral oils, grease additives and EP. It is free of bactericides and nitrosatable amines.
Multifluid E POWER EP is a metalworking fluid specifically for use in medium to heavy metal removal operations on alloyed and stainless steels. However, it can also be used on aluminium alloys and yellow alloys. It has high anti-rust and odour resistance even under critical conditions.
It produces a very stable, milky emulsion in all water types.
Bases: Minerals Classification: POWER Removal: Grinding: - EP: : Heavy duty product : High content of mineral oil and EP additives : Biocide-free : Excellent performance on steels
Multifluid E POWER EP is a metalworking fluid specifically for use in medium to heavy metal removal operations on alloyed and stainless steels. However, it can also be used on aluminium alloys and yellow alloys. It has high anti-rust and odour resistance even under critical conditions.
It produces a very stable, milky emulsion in all water types.
H00120025, H00120200
Van €205.00
Water-Miscible Metalworking Fluid LANDOIL Multifluid E UNI
Multifluid E UNI is a water miscible metalworking fluid with a high active part content, based on highly refined mineral oils and additives. It is free of chlorine, boron, amines and formaldehyde donor bactericides.
Multifluid E UNI is a universal metalworking fluid designed for use in heavy-duty machining operations on steels, stainless steels, aluminium alloys and yellow alloys. The product is particularly suitable for all heavy-duty operations on difficult-to-machine aluminium alloys and copper alloys.
In water it produces a very stable milky emulsion.
Its characteristics make it particularly suitable for use in soft water.
Bases: Minerals Classification: UNI Removal: Grinding: - EP: - : Universal product : High mineral oil content : Biodynamic product : Boron free : Excellent performance on aluminium
Multifluid E UNI is a universal metalworking fluid designed for use in heavy-duty machining operations on steels, stainless steels, aluminium alloys and yellow alloys. The product is particularly suitable for all heavy-duty operations on difficult-to-machine aluminium alloys and copper alloys.
In water it produces a very stable milky emulsion.
Its characteristics make it particularly suitable for use in soft water.
H00140025, H00140200
Van €202.50
Water-Miscible Metalworking Fluid LANDOIL Multifluid E UNI EP
Multifluid E UNI EP is a water miscible metalworking fluid with a high active part content, based on highly refined mineral oils and EP additives. It is free of boron, amines and formaldehyde-donating bactericides.
Multifluid E UNI EP is a universal metalworking fluid designed for use during heavy machining operations on steel, stainless steel, aluminium alloys and yellow metals. The product is particularly suitable for all heavy-duty operations on difficult-to-machine materials such as high-alloy steels and stainless steels.
In water it produces a very stable milky emulsion.
It particularly suitable for use in soft water.
Bases: Minerals Classification: UNI Removal: Grinding: - EP: : Universal product : High content of mineral oil and EP additives : Biodynamic product : Boron free : Excellent performance ...
Multifluid E UNI EP is a universal metalworking fluid designed for use during heavy machining operations on steel, stainless steel, aluminium alloys and yellow metals. The product is particularly suitable for all heavy-duty operations on difficult-to-machine materials such as high-alloy steels and stainless steels.
In water it produces a very stable milky emulsion.
It particularly suitable for use in soft water.
H00090025, H00090200, H00090005
Van €49.20