Van Maele. LANDOIL

LANDOIL DROPLESS GREASE high temperature universal grease DROPLESS GREASE is an infusible multi-purpose lubricating grease in a spray pack with a high protective capacity against oxidation.
Thanks to its formulation and the additives contained within it, DROPLESS GREASE has the ability to lubricate surfaces subject to high loads while maintaining this characteristic at high and low speeds.
The product is infusible.
This multi-purpose lubricating grease is an excellent lubricant for ball bearings, rollers, pivots, cylinders and parts subject to considerable stress and friction in general.
DROPLESS GREASE can work effectively in the temperature range of -10° C to +200° C.

H22210400

Van €9.72

LANDOIL Fluid Tester refractometer The refractometer is an optical instrument that measures the refractive index of a fluid to determine the concentration percentage of the coolant lubricating emulsions. Its daily use makes it possible to verify the correct concentration of the emulsion in the tank, in order to avoid waste, protect machine tools and reduce total production costs.

: Option to check the correct concentration of the emulsion : Instant and easy use

H3632018

Van €95.00

Landoil MV volumetric mixer A volumetric mixer is an instrument driven only by water pressure that guarantees stable emulsions at the required concentration.
Using a volumetric mixer can reduce filling and topping up times for machine tool tanks, saving time and reducing costs. The volumetric mixer can also be used for topping up, specifying the concentration with ease and precision.
The LANDOIL volumetric mixer is made in Italy and all units are tested individually before being sold to the end user. The mixer in its full version is equipped with a filter, pressure reducer, suction tube, stainless steel housing to prevent the product from accidental impact and 2 valves so that it is ready for use.

: Dosing accuracy : Does not require operator supervision : Quick top-up

H366010, H366012

Van €924.00

LANDOIL NEBULIS hydraulic oil NEBULIS is a mineral hydraulic lubricant with a high natural viscosity index and suitably additivated to enhance antioxidant and anticorrosive properties.
Thanks to its formulation, NEBULIS hydraulic oil can be used in turbines, compressors and hydraulic systems.
Thanks to its characteristics, NEBULIS passes AFNOR FNE 48603 and HL DIN 51524 Part 1 tests. It is a high-quality hydraulic oil and is excellent for use in industrial air filters and bearings.

NEBULIS is a mineral hydraulic lubricant with a high natural viscosity index and suitably additivated to enhance antioxidant and anticorrosive properties. Thanks to its formulation, NEBULIS hydrauli...

H20110001, H20110005, H20110025

Van €8.50

LANDOIL PROTEX DW/O Protective Fluid Protex DW /O is a corrosion protection fluid with a dewatering action designed specifically for the protection of steel laminates and semi-finished products even of complex geometry, as well as for the external protection of parts subject to subsequent handling. It is ideal in situations where there is a need to leave a thin protective layer on the treated surface, easily removable with rags or ordinary solvents.
The product is easily applied by immersion, spray, brush and can be removed with rags, industrial cleaners, alkaline solutions and/or petroleum solvents.
The excellent wetting power allows any moisture or water film to be removed from the treated surfaces.
The anti-corrosion and anti-oxidant components form a thin film that protects the parts for a medium to long period (12 months) if the material is properly stored indoors after treatment.

: Protection for periods of up to 12 months : Easy to apply : Easily removable

H2106025, H2106400

Van €6.30

LANDOIL PROTEX O Protective Fluid Protex O is an oil-based corrosion protection fluid consisting of paraffinic bases with added anti-corrosion and anti-oxidant additives, specifically designed to protect semi-finished products or finished products that must withstand extreme storage or transport conditions. The product is easily applied by brushing on previously dried parts and can be removed with rags, industrial cleaners, alkaline solutions and/or petroleum solvents. The excellent covering capacity and the exceptional anti-rust power allow the product to effectively grip the part to be protected and ensure effective protection even in critical conditions for periods exceeding 12 months. The light graduation is suitable for protecting small components with even complex geometries; it is preferably used by immersion or spray but can also be dispensed by brush. The heavy grade, due to its high adhesive strength, is also used on large sized components and is preferably applied by brush or pad.

: Protection for periods longer than 12 months : Easy to apply : Versatility of use (shipping + storage)

H2112025

Van €194.25

LANDOIL PROTEX W protective fluid PROTEX W is a wax-based corrosion protection fluid for metal components that are stored in high humidity and high salinity conditions. Thanks to a specific formulation and excellent balance of detergents and solvents, PROTEX W has excellent degreasing properties and a dewatering effect.
The product passes ASTM B117 tests (salt spray test) with 90 hours of resistance. PROTEX W retains its protective capacity for 15 months in case of indoor storage while outdoors, by allocating the material to covered areas, it manages to maintain its protective capacity for 9 months.

: Protection for periods exceeding 12 months even in saline atmospheres : Easy to apply : Easily removable

H2117025

Van €273.75

LANDOIL Rasen belt oil separator The RASEN N series of belt oil separators are designed for the removal of foreign oil in machine tools, washing fluid tanks, compressor condensation and in general where it is necessary to separate surface oil from the underlying fluid.
They are easily applicable even in tight spaces, and allow for an effective mechanical removal of polluting oils from the surface of metalworking fluid emulsions.
Features:
• STAINLESS Steel and Light Alloy Construction
• PVC/Polyurethane Belt
• Low tension planetary gear motor, according to ISO standards, protected against dust and accidental impact
• 7 speeds adjustable via a potentiometer
• Air fitting for emulsion oxygenation included
• Can be equipped with a level switch
• 230 V power supply

: Reduces biological risks : Reduces smoke generated by foreign oils : Extends the service life of the emulsion : No operator supervision required

H4042N30X2,5, H4042N30X5, H40423025B, H40423050B

Van €567.00

LANDOIL RUST REMOVER RUST REMOVER is a water-based liquid solution for removing surface rust. It is a product that restores the lustre of oxidised metals. RUST REMOVER is biodegradable; it is also a safe product for the operator, is non-toxic, non-corrosive or flammable and contains no volatile organic compounds.
RUST REMOVER will not damage copper, brass, aluminium, plastic, rubber, wood or vinyl. It will not remove paint or chrome, except when this is oxide-based.
For best results, rusted parts should be fully immersed in RUST REMOVER and removed when the rust layer is completely gone. A superficial patina of rust will take 20 to 30 minutes, a medium patina will take up to 4 hours and very rusty parts may require an overnight immersion.

: CUNA NC 956 - 18 : ASTM D 3306 TYP 2 : SAE J 1034 10% Vol.: -4°C 20% Vol.: -9°C 30% Vol.: -16°C 40% Vol.: -24°C 50% Vol.: -32°C : Antifrost può essere impiegato su motori di autovetture, ve...

H21910025

Van €302.50

LANDOIL TAP FLUID cutting fluid TAP FLUID is a tapping and threading lubricating oil designed and formulated for maximum performance on alloyed and stainless steels.
This cutting and tapping oil, thanks to its innovative formulation, allows optimal tool lubrication, creating a very thin film that guarantees maximum lubrication during use.
TAP FLUID tapping oil is an excellent all-purpose oil due to its mechanical coupling characteristics between the cutting edge and the metal; for this reason it is also suitable for chip removal with bench tools.

H13510400, H13510001, H13510005

Van €8.47

LANDOIL TOS oil separator Coalescence oil separator capable of separating foreign oils, sludge and soap from emulsions.
Thanks to the self-levelling suction unit, it can also be used in tanks with narrow spaces and independently follows the level of the emulsion.
It does not require operator assistance, except in the discharge phase.
It effectively de-oils aqueous fluids with neutral or weakly alkaline pH, with temperatures up to 60°C.

: Bag filter 300 µm : Dynamic suction inlet with magnet. h 70 mm : Suction hose Ø 20 mm - 2 m. : Exhaust pipe 40 mm - 2 m. 01: The dirty emulsion enters the TOS through a bag filter that removes ...

H4000TOS

Van €3875.00

LANDOIL Twist Oil industrial aspirator Three-phase industrial sump vacuum for continuous use, capable of separating mixed liquids and solids. The emptying of liquids takes place by reversing the flow of air generated by the turbine, eliminating any problem of possible blocking of the transfer pumps. Weight: 220 kg.

Components:
- Turbine with three-phase motor
- Liquid aspiration time L/sec. 280/40
- Liquid drain time L/sec. 280/50
- Microperforated galvanized steel basket
- Level probe with automatic locking system
- Aspiration nozzle Ø 50 mm
- 280 Litre capacity tank which also acts as a robust load-bearing structure
- Instant recovery of metalworking fluids with direct return delivery to the tank via a drain tube with ball valve
- Accessory holders

: Washable nylon filter : PUR hose Ø 50 mm x 3 m. : Rubber bore Ø 50 mm : Exhaust pipe Ø 50 mm : 2" ball valve : Flat metal nozzle L 400 mm : Anti-oil rubber tapered nozzle 01: The vacuum is g...

H4105280

Van €5992.00

LANDOIL Twist Oil industrial aspirators Single-phase industrial sump vacuum suitable for the separation of liquids mixed with solids. The emptying of liquids takes place by reversing the flow of air generated by the turbine, eliminating any problem of possible blocking of the transfer pumps.

Features:
- Turbine with single-phase motor
- Liquid aspiration time L/sec 130/30
- Liquid discharge time L/sec 130/50
- Microperforated galvanized steel basket
- Level probe with automatic blocking system
- Suction mouth Ø 50 mm
- immediate recovery of metalworking fluids with direct return to the sump via drainage pipe with ball valve
- frame with storage compartment for accessories

: Washable nylon filter : PUR hose Ø 50 mm x 3 m. : Rubber bore Ø 50 mm : Exhaust pipe Ø 35 mm x 3 m. : Ball valve 1" - 1/4 : Flat metal nozzle L 400 mm : Anti-oil rubber tapered nozzle 01: Th...

H4100130

Van €3986.00

LANDOIL Venturi venturimeter mixer The Venturi mixer gives each customer the possibility of quickly filling and topping up the tank of the machine tool.
It is recommended to periodically check the concentration at the mixer outlet.

: Does not require operator supervision : Quick top-up

H366510

Van €407.00

LANDOIL WHITE GREASE FU food-grade vaseline grease WHITE GREASE FU lubricates by resisting water, steam and fumes. WHITE GREASE FU is a mixture of high purity lubricants according to the standards of Official Pharmacology.
The absence of toxic substances and the high quality of the formulation make the product especially appreciated in the following uses
- in food plants, where there may be accidental contact with food;
- in pharmaceutical and textile plants, where clean and effective lubrication is required;
- in musical instruments, for the lubrication of movements.

H22760400

Van €9.06

Lubrificante siliconico LANDOIL HI-SIL HI-SIL is a multi-purpose polysiloxane-based release lubricant; it is a product designed and formulated to make the surfaces where it is sprayed smooth and shiny by eliminating the adhesiveness of glue, ink and paint residues. It is ideal for graphic, textile and footwear equipment.
The polysiloxane-based multi-purpose release lubricant HI-SIL is recommended for the lubrication of plastic parts and sliding frames of tools and instruments.
HI-SIL has a very high silicone content.

H25260400

Van €8.49