Zoeken
Aluminum alloy Rivets FAR
Aluminum alloy rivets in self-service packaging.
Aluminum bushing AIMg3,5 - EN AW 5154A. Nail in white galvanized steel Chrome III.
F83873008, F83873010, F83874010, F83874012, F83874016, F83874810, F83874812, F83874816
Meer details
|
Van €3.10
|
Battery Riveters MILWAUKEE M12 BPRT-201X
M12 BPRT-201X cordless riveting machine applies up to 325 4.8 mm stainless steel rivets with a single charge of a 2.0 Ah battery. Suitable for the application of rivets in aluminum, stainless steel and copper, with a diameter of Ø 2.4 mm up to a solid piece of Ø 4.8 mm. Stroke length of 20 mm. Clamps accessible without the use of tools. Possibility of storing the nozzles in the practical compartment placed on the tool.
Works with all Milwaukee® M12 ™ batteries.
F834012
Meer details
|
Van €637.00
|
Cable ties for standard cabling polyamide 6.6 ELEMATIC
These cable ties are made of polyamide 6.6 so as not to cause interferences with electronic devices. The black cable ties are made with the addition of carbon black, which gives a higher resistance to UV light compared to natural coloured cable ties.
Technical data: - Halogen free polyamide 6.6 - Moisture absorbency: 2.7% (at 50% relative humidity) - Operating temperature: -40°C to 85°C - Flame resistance: UL 94 class V2 - Resistance to external agents: excellent resistance to aromatic solvents, oils, greases, oil based products, good resistance to bases, limited resistance to acids, not resistant to phenol and chlorinated solvents. Tested according to IEC EN 62275.
F8703B35, F8703B40, F8703B65, F8703B75, F8703G35, F8703G40, F8703G65, F8703G75, F8703R35, F8703R40, F8703R65, F8703R75, F8703V35, F8703V40, F8703V65, F8703V75, F8701B15, ...
Meer details
|
Van €2.00
|
Cable ties for standard cabling polyamide 6.6 ELEMATIC
These cable ties are made of polyamide 6.6 so as not to cause interferences with electronic devices. The black cable ties are made with the addition of carbon black, which gives a higher resistance to UV light compared to natural coloured cable ties.
Technical data:
- Halogen free polyamide 6.6
- Moisture absorbency: 2.7% (at 50% relative humidity)
- Operating temperature: -40°C to 85°C
- Flame resistance: UL 94 class V2
- Resistance to external agents: excellent resistance to aromatic solvents, oils, greases, oil based
products, good resistance to bases, limited resistance to acids, not resistant to phenol and
chlorinated solvents. Tested according to IEC EN 62275.
|
|
Cable ties pliers WRK
Professional version suitable to pull and cut nylon straps up to 9,5 mm wide.
Polished sheet steel body, weight 300 gr
F8709180
Meer details
|
Van €40.63
|
Graffatrici pneumatiche per graffe serie 80 OMER
Pneumatic staplers Top Quality Made in Italy for Series 80 staples made with wire with rectangular section 0,65x0,95 mm, internal width 11,4 mm and length from 4 to 16 mm. Specification of models:
1/4 "BSP compressed air inlet connection.
F852016, F852016NF, F852016S, F852016SL, F852016SLS, F852016V
Meer details
|
Van €317.50
|
Hand riveters for blind rivets
Hand riveters.
F8298DX5
Meer details
|
Van €32.20
|
Hand riveters for threaded inserts FAR EXTRA KJ21
Painted sheet steel body, plastic handgrips.
Plastic case containing KJ21 riveter with tie rods and heads M3 ÷ M8.
F8400R/4
Meer details
|
Van €216.00
|
Hand riveters for threaded Inserts WRK
Hand riveter for threaded inserts complete with tie rods and heads.
F8398NX55
Meer details
|
Van €102.00
|
Hand riveters with an assortment of threaded inserts WRK
Hand riveter for threaded inserts NX55 with an assortment of inserts in a metal box.
F8399CNX55
Meer details
|
Van €188.50
|
Hand riveters with blind rivets
Hand riveter DX5 with an assortment of aluminium rivets in a metal box.
F8299CDX5
Meer details
|
Van €67.00
|
Hose clamps W2B in stainless steel AISI 304 DIN 3017 12 mm STANDARD
Stainless steel hose clamps standard DIN 3017 They are made with a perforated band and rounded edges to avoid damaging the tubes. Mechanical seam of the tape to guarantee an effective seal. The tie has an high flexibility in the adaptment of the circumference of the tube and it is suitable for all industrial applications.
Material: Stainless steel hose clamps AISI 304 - Screws and band in carbon zinc steel AISI 304
F8828016, F8828020, F8828023, F8828025, F8828030, F8828032, F8828040, F8828050, F8828060, F8828070, F8828080, F8828090, F8828100, F8828110, F8828120, F8828130, F8828140, ...
Meer details
|
Van €293.17
|
Hose clamps W2B in stainless steel AISI 304 DIN 3017 9 mm STANDARD
Stainless steel hose clamps standard DIN 3017 They are made with a perforated band and rounded edges to avoid damaging the tubes. Mechanical seam of the tape to guarantee an effective seal. The tie has an high flexibility in the adaptment of the circumference of the tube and it is suitable for all industrial applications.
Material: Stainless steel hose clamps AISI 304 - Screws and band in carbon zinc steel AISI 304
F8827008, F8827020, F8827025, F8827030, F8827032, F8827040, F8827050, F8827060, F8827070, F8827080, F8827090, F8827100, F8827110, F8827120, F8827010, F8827012, F8827016...
Meer details
|
Van €178.28
|
Hose clamps W2B in stainless steel AISI 430 DIN 3017 12 mm STANDARD
Stainless steel hose clamps Standard DIN 3017. They are made with a perforated band and rounded edges to avoid damaging the tubes. Mechanical seam of the tape to grarantee an effective seal. The tie has an high flexibility in the adaptment of the circumference of the tube and it is suitable for all industrial applications..
Material: Stainless steel tape AISI 430 TI - Screws and band in carbon zinc steel.
F8813016, F8813020, F8813023, F8813025, F8813030, F8813035, F8813040, F8813050, F8813060, F8813070, F8813080, F8813090, F8813100, F8813110, F8813120, F8813130, F8813140, ...
Meer details
|
Van €112.25
|
Hose clamps W2B in stainless steel AISI 430 DIN 3017 9 mm STANDARD
Stainless steel hose clamps Standard DIN 3017. They are made with a perforated band and rounded edges to avoid damaging the tubes. Mechanical seam of the tape to grarantee an effective seal. The tie has an high flexibility in the adaptment of the circumference of the tube and it is suitable for all industrial applications..
Material: Stainless steel tape AISI 430 TI - Screws and band in carbon zinc steel.
F8812008, F8812010, F8812012, F8812016, F8812020, F8812025, F8812030, F8812032, F8812040, F8812050, F8812060, F8812070, F8812080, F8812090, F8812100, F8812110
Meer details
|
Van €71.29
|
Hydropneumatic riveter for ATLAS R1006 rivets
Well-balanced hydropneumatic riveters, designed for the best ergonomics and to reduce vibrations and noise to a minimum.
Can be used with standard blind rivets in aluminium, steel and stainless steel, up to ø 6.4 mm.
F837800
Meer details
|
Van €2142.00
|
Hydropneumatic riveters for threaded inserts ATLAS R2012
Well-balanced hydropneumatic riveters, designed for the best ergonomics and to reduce vibrations and noise to a minimum. Can be used with M4 to M8 aluminium, steel and stainless steel threaded inserts.
|
|
Hydropneumatic riveters for threaded inserts ATLAS R2012
Well-balanced hydropneumatic riveters, designed for the best ergonomics and to reduce vibrations and noise to a minimum. Can be used with M4 to M8 aluminium, steel and stainless steel threaded inserts.
F844500
Meer details
|
Van €2870.00
|
Hydropneumatic riveting tools FAR RAC 171
Hydro-pneumatic riveting tools for standard blind rivets, Farbolt high performance rivets and similar or for high performance X/S Trifar rivets by fitting the nozzel code 71345652 (optional).
Features:
- Rivet retention system and recovery of the cut nail
- Maximum traction force 12273 N
- Stroke 25.5 mm
- Weighted acoustic power (A) 80 dBA
F838500
Meer details
|
Van €1068.00
|
Hydropneumatic riveting tools FAR RAC 182
- Lightweight and ergonomic hydropneumatic riveting tools for standard blind rivets, Farbolt high performance rivets and similar by mounting the accessory kit code 74000090 (optional) or for high performance X/S Trifar rivets by mounting the nozzle code 71345652 (optional) .
Features:
- Safety system in the recovery of the cut nail
- Connection for compressed air on both sides
- Maximum traction force 10500 N
- 20.5 mm stroke
- Weighted acoustic power (A) 87 dBA
F838100
Meer details
|
Van €804.00
|
Long handled riveters for blind rivets
Long handle riveter with sheared nail collection.
F8319DX65
Meer details
|
Van €75.00
|
Long handled riveters for threaded inserts
Long handled riveter for threaded inserts complete with tie rods and heads.
F8409CNX65
Meer details
|
Van €248.00
|
Manual hammer staplers for staples Series113 OMER G-19
Manual hammer staplers for 113 Series staples made with wire with rectangular section 0.50x0.75 mm, internal width 9.5 mm and length 6 and 8 mm.
F850319
Meer details
|
Van €51.50
|
Manual staplers for staples Series 113 OMER LT-33
Manual staplers for staples Series 113 made with wire with a rectangular section 0.50x0.75 mm, internal width 9.5 mm and length from 6 to 14 mm.
F850133
Meer details
|
Van €53.00
|