Zoeken
High performance roughness testers ALPA FACETEST 80
Backlit liquid crystal TFT 5.7" 256 -colour display with touch screen technology; 46 parameters measured according to the international Roughness Index - profile-waveness 1000μm measurement range, auto travel according to cut-off, also selectable from 1 up to 10 times the cut-off (0.8 mm). Built-in thermal printer to display graph and numerical data reports, 0.001μm resolution, USB output.
Portable laboratory roughness tester- Professional translator with internal metrological reference. Maximum traverse length of 50 mm. Precision measurement with 0.32 mm min traverse length ( 4 x 0.08 + 0.20 mm) SB10 and SB60 dual pick-up. For accurate roughness measurement: radial roughness (pipes, balls). With diamond sensor stylus.
D724301, D724302
Meer details
|
Van €5035.00
|
Portable roughness /surface profiler testers ALPA WRP LA253
This new roughness tester revolutionises roughness measurement. Large 7-inch touchscreen display with 16 million colours. 81 roughness parameters according to major international standards. Integrated CAD for profile analysis. Wide 5000μm measuring range in roughness and profilometry. Resolution 0.1nm (0.0001μm) over 5000μm. Automatic save last 6 measurements, manual save up to 1000 profilometry measurements and 4000 roughness measurements (graphs+parameters).
- Measuring range: Z = 5000 μm
- Resolution: 0.1 nm (0.0001 μm) over ± 1500 μm
- Cut-off length: 0.08 - 0.25 - 0.8 - 2.5 - 8 mm
- Number of cut-offs: 1 to 20 cut-offs (within 60 mm useful X)
- Scanning stroke: X=60 mm
- Probe: Differential inductive probe with interchangeable rods (Carbon end only)
- Measurement parameters: 81 parameters
- Ra, Rq, Rt, Rz, Rp, Rv, Rc, Rsk, Rku, RSm, RΔq, RΔa, Rmax, Rδc, Rmr,
Rmr(c), RPc, RLo, Rlr, Rzjis, RHSC, R3z, hp, Ep, Pa, Pq, Pt, Pv, Pc, Psk,
Pku, PSm, PΔq, Pδc, PPc, PLo, Plr, PHSC, Wa, Wq, Wt, Wz, Wp, Wv, Wc, Wsk,
Wku, WSm, WΔq, Wδc, WPc, WLo, Wlr, WHSC, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2,
Rpk*, Rvk*, WDSm, WDc, WDt, R, AR, Rx, W, Aw, Wx, Wte, Rke, Rpke, Rvke,
Mr1e, Mr2e, A1e, A2e
- Units of measurement: millimetres and inches
- Interface: 7 inch touch screen graphic display
- Languages: Italian, French, English, German, Spanish, Portuguese, Japanese,
Chinese, Korean
- Memory: up to 4000 roughness and 1000 profilometre measurements
D7246KITP
Meer details
|
Van €1031.00
|
Portable roughness tester ALPA LA251LITE
PORTABLE ROUGHNESS TESTER with 90° rotating diamond probe and optical signal transmission. Gauss filter. Interchangeable tip. 8 parameters, ISO 4287 compliant (Ra; Rq; Rt; Rz; Rc; Rmax; Rsm; Rpc), 5 parameters ISO 12085 compliant (Pt, R, AR, Rx, PPc). The extremely small size (the smallest available) and fast battery charging, via the USB cable, make this instrument a turning point in the conception of shape-measuring instruments. The application can be downloaded to your mobile phone and computer in order to download data via Bluetooth.
D7240LITE
Meer details
|
Van €2491.00
|
Portable roughness testers ALPA FACE-TEST 25
Face Test 25 roughness is a highly-versatile hand-held device. Suitable for both horizontal and vertical measuring, 90°, V-shaped, flat surfaces, internal and external diameters, mounted on stand supports. Gauss filter, 8 parameters, ISO 4287 compliant (Ra, Rq, RMS), Rt, Rz, Rc, Rmax, Rsm, Rpc, 5 parameters ISO 12085 compliant (Pt, R, AR, Rx, PPL), profile and capacity curve data transmission to the printer (printer supplied as optional). Output connection to PC with advanced computing program (optional) and graphs printing, new electronics with large display, 0,001 µm resolution, Z400/mm measurement range designed for higher friction coefficient measurements (sanding, embossing etc.). Supplied with standard tester, roughness samples and instruction manual. Face test 25 plus may also mount special interchangeable testers as well as extensions for depth drilling measurement. Basic software and USB cable are included.
Optional
- ST1 stand with granite plate 300 x 200
D7241GRAF
Meer details
|
Van €2226.00
|
Roughness speciments Kit
The set consists of 30 plates reproducing the most important and widespread machining works, such as lapping, grinding, drilling, milling and turning, with different roughness between 0,05 and 12,5 μm in Ra. Useful for corresponding indicative comparison.
(NB Not suitable for roughness tester calibration or verification).
D724530
Meer details
|
Van €360.00
|
Roughness testers MITUTOYO SJ-210 178-560-11D
This is a portable measuring instrument that allows you to easily and accurately measure surface roughness.
The SJ-210 offers you the following benefits: - Skid system gives you user friendly and intuitive menu navigation - It works independently of mains power, allowing you to make on-site measurements - The 6.0 cm [2.4"] colour graphic, back-lit LCD gives you excellent readability - It performs roughness analyses conform to various international standards (EN ISO, VDA, ANSI, JIS) and customized settings - Data memory: up to 10 measurement conditions and a measurement profile can be stored - Optional memory card: to expand the range of applications - Calculation results, assessed profiles, bearing and amplitude curves can be displayed - Operation by keys on the front and under the sliding cover - Support of 21 languages
D7232210
Meer details
|
Van €1350.00
|
Stands for roughness testers ALPA
Stand for roughness testers with granite base and colum with micrometric positioning.
D7244STAT
Meer details
|
Van €831.00
|
Stands for roughness testers MITUTOYO
Stand for roughness testers with granite base and column with micrometric positioning.
D7237STAT
Meer details
|
Van €1271.00
|