Zoeken
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
WRK
Toon als
Sorteren op
Tonen
per pagina
Set of long hexagonal L keys with ball end WRK
L keys for driving bolts and cap screws.
Vanadium chrome steel. Made in Germany - Black finish.
L keys for driving bolts and cap screws. Vanadium chrome steel. Made in Germany - Black finish. Set of L keys complete with practical bi-component case. E2283: 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 -...
Vanadium chrome steel. Made in Germany - Black finish.
E2284SET9
Van €25.98
Set of spring collects ER40 WRK
Complete sets for all diameters, recommended as the best solution for all types of milling operations.
C411540SBOX, C411540SBOX1
Van €108.20
Single Diamond dressers WRK
Single diamond dressers good quality non-returnable. Suitable for dressing operations on abrasive wheels of various grain sizes. With cylindrical shank or morse taper.
G762505010, G762510010, G762515010, G7625050CM1, G7625100CM1, G7625150CM1
Van €171.60
Material: High speed steel Co Standard: Factory standard Teeth: Alternate Profile: Type N Surface treatment: Bright Application: For steel and cast iron slotting TIPOLOGIA: SERVICE GEOMETRY: -...
A54551002, A54551002,5, A54551003, A54551003,5, A54551252, A54551252,5, A54551253, A54551253,5, A54551254, A5455631,6, A5455632, A5455632,5, A5455633, A5455633,5, A5455802, A5455802,5, A5455803, ...
Van €209.51
Slitting saw blades in HSS DIN 1837-A fine toothing WRK
HSS slitting saws in both high speed and super high speed steels suitable for cutting-off, milling, and grooving steels and alloys on manual, semi-automatic and fully automatic machines.
The saw blade range is Ø 20 mm - Ø 250 mm with thicknesses ranging 0,3 mm - 6 mm in variable increments. On request up to Ø 315.
All standard saws are available in HP-GRIND execution but are readily available in VAPO or P.V.D. (Physical Vapour Deposition) coated execution.
TIPOLOGIA: SERVICE GEOMETRY: - APPLICATION: - Material: HSS
The saw blade range is Ø 20 mm - Ø 250 mm with thicknesses ranging 0,3 mm - 6 mm in variable increments. On request up to Ø 315.
All standard saws are available in HP-GRIND execution but are readily available in VAPO or P.V.D. (Physical Vapour Deposition) coated execution.
A54600200,8, A54600201, A54600202, A54600202,5, A54600250,5, A54600251, A54600251,6, A54600252, A54600253, A54600255, A54600320,6, A54600320,8, A54600321, A54600321,2, A54600322, A54600400,3, A54600400,4, ...
Van €17.72
Slitting saw blades in HSS DIN 1838-B coarse toothing WRK
HSS slitting saws in both high speed and super high speed steels suitable for cutting-off, milling, and grooving steels and alloys on manual, semi-automatic and fully automatic machines.
The saw blade range is Ø 50 mm - Ø 125 mm with thicknesses ranging 0,5 mm - 6 mm in variable increments.
On request up to Ø 315.
All standard saws are available in HP-GRIND execution but are readily available in VAPO or P.V.D. (Physical Vapour Deposition) coated execution.
TIPOLOGIA: SERVICE GEOMETRY: - APPLICATION: - Material: HSS
The saw blade range is Ø 50 mm - Ø 125 mm with thicknesses ranging 0,5 mm - 6 mm in variable increments.
On request up to Ø 315.
All standard saws are available in HP-GRIND execution but are readily available in VAPO or P.V.D. (Physical Vapour Deposition) coated execution.
A54650500,6, A54650500,8, A54650501, A54650501,2, A54650501,6, A54650502, A54650502,5, A54650630,5, A54650630,8, A54650631, A54650631,2, A54650631,5, A54650631,6, A54650632, A54650633, A54650634, A54650635, ...
Van €24.08
Slitting saws in solid carbide coarse toothing WRK DIN 1838-B
Solid carbide slitting saws to DIN 1838 standard with type B large toothing.
On request Ø run from 15 mm to 200 mm; thickness from 0.1 mm to 6 mm.
TYPOLOGY: SERVICE GEOMETRY: - APLICATION: - MATERIAL: HM
On request Ø run from 15 mm to 200 mm; thickness from 0.1 mm to 6 mm.
A48150150,3, A48150150,4, A48150150,5, A48150200,2, A48150200,5, A48150300,7, A48150301,7, A48150400,9, A48150401, A48150401,3, A48150401,5, A48150500,5, A48150501,5, A48150502, A48150503, A48150630,5, A48150630,8, ...
Van €23.76
Slitting saws in solid carbide fine toothing WRK DIN 1837-A
Solid carbide slitting saws to DIN 1837-A standard with type A fine toothing.
On request Ø run from 15 mm to 200 mm; thickness from 0.1 mm to 6 mm.
TYPOLOGY: SERVICE GEOMETRY: - APPLICATION: - MATERIAL: HM
On request Ø run from 15 mm to 200 mm; thickness from 0.1 mm to 6 mm.
A48100200,2, A48100200,5, A48100201, A48100201,2, A48100201,5, A48100250,5, A48100251, A48100251,5, A48100252, A48100300,3, A48100300,4, A48100300,5, A48100300,7, A48100301, A48100301,2, A48100301,5, A48100302, ...
Van €26.42
Socket drivers 1/2" for Torx screws WRK
Socket drivers chrome-vanadium steel with satin finish, long insert in phosphated steel for Torx®.
E460915, E460920, E460925, E460927, E460930, E460940, E460945, E460950, E460955
Van €13.43
Soft flap grinding discs WRK FOX
Zirconium flap grinding discs with glass fiberglass backing.
The flaps arranged in an angular way are characterized by a great flexibility comparable to that of a fiber disc but with a longer duration of life.
Particularly suitable for working angles, shaped edges, corrugated surfaces, thin sheets or where it is necessary to exert low pressures. Cold cut.
Useful on all materials with medium power grinders.
Operating speed 10,400 rpm (63 m/s)
The flaps arranged in an angular way are characterized by a great flexibility comparable to that of a fiber disc but with a longer duration of life.
Particularly suitable for working angles, shaped edges, corrugated surfaces, thin sheets or where it is necessary to exert low pressures. Cold cut.
Useful on all materials with medium power grinders.
Operating speed 10,400 rpm (63 m/s)
G1410115040, G1410115060, G1410115080
Van €5.35
Soft flap grinding discs WRK MINI FOX
Shares the same Fox discs features, 50 mm diameter, Mini Fox guarantees full performance in restricted spaces.Pad in special Nylon with Roloc quick coupling.
Cutting speed 24000 rev. (63 m/s)
Cutting speed 24000 rev. (63 m/s)
G1415050040, G1415050060, G1415050080, G1415050120
Van €4.26
Material: Micro-grain carbide Standard: Factory standard Tolerance: e8 Shank: Cylindrical Helix: 45° right-hand Surface treatment: Polished Application: Slotting and side milling on aluminum al...
Van €68.70
Spiral flute 15° taps for blind- holes M WRK
ISO thread DIN 13 coarse pitch
Tolerance: 6H ISO 2 Surface finish: Bright Thread depth: Hole type: Blind Chamfer form: C 2/3 Application: Structural and case hardened steel R : M : C 2/3 : - : HSSE
A2030M2, A2030M2,5, A2030M3, A2030M4, A2030M5, A2030M6, A2030M8, A2030M10, A2030M5GP, A2030M6GP, A2030M8GP, A2030M10GP, A2030M12, A2030M14, A2030M16, A2030M18, A2030M20, ...
Van €17.24
Spiral flute 15° taps for blind- holes M WRK
ISO thread DIN 13 coarse pitch
Tolerance: 6H ISO 2 Surface finish: Bright Thread depth: Hole type: Blind Chamfer form: C 2/3 Application: Structural and case hardened steel R
Spiral flute 40° taps for blind- holes M WRK
ISO thread DIN 13 coarse pitch
Tolerance: 6H ISO 2 Surface finish: Bright Thread depth: Hole type: Blind Chamfer form: C 2/3 Application: Low and medium resistance steel ≤ 800 N/mm² : M : C 2/3 : - : HSSE
A2040M2, A2040M2,5, A2040M3, A2040M4, A2040M5, A2040M6, A2040M8, A2040M10
Van €19.10