Winkelwagen
  • U heeft geen artikelen in uw winkelwagen.
Cataloghi

WRK

Toon als
Sorteren op
Tonen per pagina
ISO thread DIN 13 coarse pitch TEST   Tolerance: 6H ISO 2 Surface finish: Bright Thread depth: ≤ 2XD Hole type: Blind and through Chamfer form: C 2/3 Application: Structural and case hardened s...
A2010M10, A2010M10GP, A2010M12, A2010M14, A2010M16, A2010M18, A2010M2, A2010M20, A2010M22, A2010M24, A2010M27, A2010M3, A2010M30, A2010M33, A2010M36, A2010M39, A2010M3GP, ...
Van €14.04
Strap wrenches for oil filters WRK Heavy-duty strap wrench for oil filters.
F3283140
Van €20.60
Geometry: Flute 17° N/R Point angle: 118° with brazed carbide tip Surface treatment: Bright Application: General application. : EXTRA SHORT : - : HSS
A109010, A109010,5, A109011, A109011,5, A109012, A109012,5, A109013, A109013,5, A109014, A109014,5, A109015, A109015,5, A109016, A109016,5, A109017, A109017,5, A109018, ...
Van €21.54
Geometry: Normal flute, right hand cut Point angle: 135° Surface treatment: Steam tempering Application: General application. : EXTRA SHORT : - : HSS
A10101, A10101,2, A10101,3, A10101,4, A10101,5, A10101,6, A10101,7, A10101,8, A101010, A101010,5, A101011, A101011,5, A101012, A101012,5, A101013, A10102, A10102,1, ...
Van €1.68
Geometry: Special web thinning, rounded flute profile Point angle: 118° Surface treatment: Bright Application: Indicated for CN machines, materials with R ≤ 1000 N/mm². : 5xD : - : HM
A10801, A10801,1, A10801,2, A10801,3, A10801,4, A10801,5, A10801,6, A10801,7, A10801,8, A10801,9, A10802, A10802,1, A10802,2, A10802,3, A10802,4, A10802,5, A10802,6, ...
Van €5.37
Subland twist drills in HSS 180° WRK Subland twist drills in HSS 180° WRK, ideal for creating through holes and cylindrical head screws.
Point angle: 118° Surface treatment: Bright Application: For through holes with 180° screw head. : 180° SHORT : - : HSS
A1730M3, A1730M4, A1730M5, A1730M6, A1730M8
Van €35.33
Subland twist drills in HSS 180° WRK Subland twist drills in HSS 180° WRK, ideal for creating through holes and cylindrical head screws.
Point angle: 118° Surface treatment: Bright Application: For through holes with 180° screw head.
Point angle: 118° Surface treatment: Bright Application: For through holes with 90° screw head. : 90° : - : HSS
A1710M10, A1710M3, A1710M4, A1710M5, A1710M6, A1710M8
Van €50.28
Subland twist drills in HSS 90° WRK Subland twist drills in HSS 90° WRK, ideal for creating tapping holes and countersink holes.
Point angle: Surface treatment: Bright Application: For tapping pre-holes and 90° countersinks : 90° : - : HSS
A1720M10, A1720M12, A1720M3, A1720M4, A1720M5, A1720M6, A1720M8
Van €41.40
Point angle: 118° Surface treatment: Bright Application: For through holes with 90° screw head. : 90° : - : HSS
Subland twist drills in HSS 90° WRK Subland twist drills in HSS 90° WRK, ideal for creating tapping holes and countersink holes.
Point angle: Surface treatment: Bright Application: For tapping pre-holes and 90° countersinks
F35101/8-2
Van €117.54
A1811KIT
Van €292.28
Taps drill-out tools in solid carbide WRK This solid carbide tool was designed to extract broken taps from holes.
Machining is normally run dry.

For best centring, follow the procedure below:

- (1) Flatten the broken tap, using a larger tool or
a same-sized hand mill.
- (2) Select a suitable tap destroying tool and execute the work
being careful that the processed rigidity is the maximum.
Recommended cutting speed not greater than 45 m/mm and
feed rate from 0.03 to 0.05 mm.
- (3) Remove the tap pieces left along the walls using
a sharp tool.
- (4) When finished, we recommend reprocessing the hole with a drill
of the same size as the pre-tapping hole.
A181012, A18103, A18104, A18104,5, A18105, A18106, A18108, A181010
Van €56.95
Teflon tapes WRK TEFLON TAPES
L550112
Van €1.15
T-handle hexagonal wrenches with fixed rod WRK Vanadium chromium coated steel, burnished ends, up to 5 mm.