Van Maele. LANDOIL

Antifoam LANDOIL DEFOAMER 155 Defoamer-155 is a silicone antifoam in emulsion specific for aqueous systems with excellent dispersibility and rapid effectiveness, with a long-lasting effect. Defoamer-155 can be added as is to the emulsion or possibly diluted 1:10. It can be used in emulsions for metalworking, in waste water treatment systems, purification plants, process waters etc. It is extremely effective even at low dosages and in a wide pH range. The product is inert and does not chemically interfere in the system into which it is introduced. BENEFITS AND ADVANTAGES - Quick action - Long-lasting action - Low dosages (from 5 to 200 ppm) - Expansive pH range of use (2 -12) - For all aqueous systems

H35420005

Van €31.00

Anti-seize and protective pastes LANDOIL CUPRO GREASE CUPRO GREASE is an anti-seize and protective paste with ultrafine lamellar copper particles and special corrosion inhibitors. It is an extremely versatile compound that allows it to guarantee exceptional anti-adhesive and anti-rust performance in the most varied operating conditions: the product can in fact be used in an extremely extended temperature range. It can be used as an anti-seize agent for inserts, screws, nuts, pins, bolts and threaded metal fittings in general, subject to extreme conditions: from mechanical machining done with insert tools to catenaries for ovens.

Operating temperature: -30° C +1100° C
Grade NLGI: 2

H2636125, H2636400

Van €7.80

Biocidal preservative additive for emulsions LANDOIL CLEAN BATT B CLEAN BATT B is a broad-spectrum bactericidal product that can be used on any type of emulsion.The CLEAN BATT B bactericide is a specific formulation to counteract the degradation phenomena that cause bad odors insystems such as emulsions and washing waters.

ADVANTAGES:
- Wide spectrum of action
- Suitable for eliminating any microorganism
- Ease of use
- Eliminates bacteria and bad odors
Recommended concentrations: 100 mL per 100 liters

H35180005

Van €150.00

Chain lubricantsLANDOIL CHAIN OIL PRO CHAIN OIL PRO is an adhesive lubricant for catenaries and transfer systems that work even in harsh conditions. The high viscosity, the excellent adhesive and stringy power maintain a high lubricating power even in applications with complex geometries of the components in contact. It can be used on any type of chain, on bearings and on any part where lubrication is made difficult by operating conditions. Operating temperature up to 160°C.

H2236600, H2236400

Van €8.99

Cutting fluid LANDOIL ALU FLUID ALU FLUID is a lubricating oil for tapping and threading designed and formulated to have maximum performance on aluminum alloys.
The ALU FLUID cutting and tapping oil, thanks to its unique characteristics and the highly refined petroleum compounds inside, optimizes tool lubrication and chip discharge.
ALU FLUID cutting oil decreases the friction coefficient, preventing tool wear by cooling them and reducing the operating temperature.

H13410400, H13410001

Van €8.00

Distaccanti siliconici LANDOIL DETACH DETACH silicone release polish is a product designed to protect and preserve mechanical parts. Thanks to its high concentration of highly refined silicones, it is an ideal product for releasing moulds from plastic and elastomer matrices. DETACH release polish has been formulated with a high silicone content to maximise product performance. The product can effectively release rubbery surfaces from metal matrices without causing problems to the surfaces of either material.

H25360400

Van €9.85

Fungicide preservative for emulsions LANDOIL CLEAN BATT F CLEAN BATT F is a broad-spectrum fungicide that can be used on all emulsions. It is a specific product to counteract the degradation phenomena of emulsions and, in particular, the outcropping gummy films typical of fungal colonies. ADVANTAGES: - Broad spectrum of action - Suitable for eliminating any fungus - Ease of use - Eliminates fungi, algae and yeasts Recommended concentrations: 100 - 300 mL per 100 litres

H35190005

Van €150.00

Gear oil LANDOIL Gear Power Gear Power is a mineral based gear oil with sulphur and phosphorus compounds and no lead additives.
The product is designed to be used under extreme pressure conditions (they pass EP tests such as TIMKEN, 4 ball EP, 4 ball water) and therefore on any type of gear: cylindrical, helical, conical, industrial hypoid, with worm screw (in the latter two cases only where polyalkylene glycol synthetic oils are not prescribed). It is also suitable for the lubrication of flat and rolling bearings and in circulating or oil mist lubrication systems.
It has excellent thermal and oxidation resistance of steel and copper components and ensures swift water separation under all operating conditions.
It has excellent resistance to high temperatures and therefore meets the demands of modern industry.

: DIN 51517 part 3 : U.S. STEEL 224 : AGMA 9005 - E02 : ISO 12925-1 CKC/CKD : David Brown S1.53.101 : GM LS 2 EP Gear Oil : Cincinnati Machine Gear : High load resistance : Excellent corrosio...

H2031150200, H2031320200, H2031150025, H2031220025, H2031320025, H2031068025

Van €169.00

Grasso al bisolfuro di molibdeno LANDOIL MOS GREASE MOS GREASE is a compound consisting of specific lubricating and anti-adhesive agents with molybdenum disulphide additive, designed to prevent seizing between contact surfaces subjected to high temperature and pressure conditions. It is a viable alternative to graphite and is silicone-free.
MOS GREASE can be used in the mechanical and metalworking industry in general when there is a need for a product that has to meet the specific requirements of extreme lubrication and anti-adhesive performance.

H23460400

Van €13.20

Guide and slide rail oil LANDOIL Carrier Carrier is a slideway oil consisting of selected oils and special zinc-free additives that promote high adhesiveness and lubricant film size.
The product has been specifically designed for the lubrication of hydrostatic guides rails, both horizontal and vertical, and is also ideal for guides and slide rails, hydraulic circuits and slow rolling bearings.
The EP additives ensure that lubrication even under high loads and in oil-loss and oil circulation lubrication systems.

: ISO-L-HG : CINCINNATI MILACRON P47, P50 i P53 : High adhesiveness : High EP characteristics : High demulsification

H2016320025, H2016680005, H2016680025, H2016680200, H2016220025, H2016220200

Van €48.00

Hydraulic oil LANDOIL ABACUS PLUS ABACUS PLUS are lubricants for hydraulic circuits formulated with very high quality paraffinic mineral bases, zinc-free anti-wear additives, detergents, dispersants and antioxidants. In addition to use in hydraulic systems with possible contamination by water, they can also be used in closed gear reducers whose gears are moderately loaded.They meet the technical specifications ISO-L-HM and DIN 51524/2 HLPD. They are also compliant with the MB-Approval DBL 6721 specification.

ABACUS PLUS are lubricants for hydraulic circuits formulated with very high quality paraffinic mineral bases, zinc-free anti-wear additives, detergents, dispersants and antioxidants. In addition to u...

H2021320025, H2021320200, H2021460005, H2021460025, H2021460200, H2021680025, H2021680200

Van €52.00

LANDOIL Abacus hydraulic oil Abacus is a superior quality paraffinic mineral based hydraulic oil with antiwear and anti-oxidant additives. The product is designed to be used in hydraulic systems on machine tools, hydraulic presses, forklifts, rolling mills, trolleys, earth moving machines, hydraulic couplings and moderately loaded reduction gears. Given the low pour point, they are recommended in the pneumatic industry and in line lubrication systems operating at low temperatures. It has an excellent viscosity index and this makes it particularly stable despite changing temperatures: it promotes rapid start-up of the systems at low temperatures and prevents losses in volumetric efficiency of the pumps. The antiwear additive forms a lubricating film between the moving parts, significantly reducing their deterioration. The anti-corrosive additive effectively protects sensitive parts of the systems even in the presence of moisture. The antioxidant additive acts on the lubricant itself allowing extended servicing intervals without thickening or forming harmful deposits.

: ISO-L-HM : DIN 51524 P ART II HLP : DENISON HF-0, HF-1, HF-2 : AFNOR E 48-603 : VICKERS CETOP RP67H : VICKERS I-286 S; M-2950 S : FZG 12° STADIO : CINCINNATI MACHINE : USS-127, USS- 136 : ...

H204610025, H204615025, H204622025

Van €107.25

LANDOIL AFM oily mist aspirator Aspirator based on an inertial and mechanical system capable of eliminating oil mist, fumes and vapours generated by mechanical processes using neat oils. It features an innovative system designed to achieve an effective and ultra high abatement of pollutants directly at the source, with the positioning of the electric fan downstream in relation to the filter battery. This feature allows quick and easy replacement, maintenance and periodic inspection directly from the filter compartment door. Decanting and filtration is performed through the stilling chamber, the prefilters, the high efficiency cartridge H12, the two absolute filters H13, so as to obtain a filtration rate of 99.99%. Supply voltage 400 V / 50 Hz three-phase.

: Luminous clogging detector signal : Pre-filters : H12 cartridge : 2 x H13 filters 01: Oil mists, fumes and vapours are suctioned via an inertial impact oil separator which separates them from l...

H54700500, H54701000, H54702000, H54703000

Van €4148.10

LANDOIL Antifrost BLUE ECO coolant fluid Antifrost BLUE ECO is a blue, concentrated ethylene glycol coolant that is free of amines, nitrites and phosphates and has an excellent toxicological profile.
It is used to lower the freeze point of the mixture to the set limit. Its additives allows it to avoid corrosion during use, to protect ferrous and non-ferrous alloys.
The product is designed to be applied to all metals that comprise the various parts of a cooling system, especially in aluminium.
At boiling point, it minimises any inconveniences by inhibiting foaming.

: CUNA NC 956 - 18 : ASTM D 3306 TYP 2 : SAE J 1034 10% Vol.: -4°C 20% Vol.: -9°C 30% Vol.: -16°C 40% Vol.: -24°C 50% Vol.: -32°C : It can be used on engines used in cars, commercial vehicles...

H2054005, H2054025

Van €55.50

LANDOIL DROPLESS GREASE high temperature universal grease DROPLESS GREASE is an infusible multi-purpose lubricating grease in a spray pack with a high protective capacity against oxidation.
Thanks to its formulation and the additives contained within it, DROPLESS GREASE has the ability to lubricate surfaces subject to high loads while maintaining this characteristic at high and low speeds.
The product is infusible.
This multi-purpose lubricating grease is an excellent lubricant for ball bearings, rollers, pivots, cylinders and parts subject to considerable stress and friction in general.
DROPLESS GREASE can work effectively in the temperature range of -10° C to +200° C.

H22210400

Van €9.72