Inserti tondi LTEC COPY MR
Inserti tondi LTEC COPY MR, sono perfetti per eseguire lavorazioni di sgrossatura.
B6A3110RDMM01, B6A3112RDMR08
Van €9.79
Instant cyanoacrylate adhesive LTEC CU1
Universal instant adhesives that work very well on most materials, including acid surfaces such as wood, leather, cardboard, paper, etc. is suitable for general use. Great speed of polymerziation and high adhesive power. - Fixing time 1 - 3 sec - Operating temperature from -55 to +95°c - Colour: transparent - Certifications: NSF
J0013050
Van €19.20
Instant cyanoacrylate adhesives LTEC CU6
High performance instant adhesives for rubbers (in particular EPDM) and plastics. Excellent resitance to ageing. The low viscosity of the product allows to obtain a very thin adhesive film. For anti-adhesive plastics it must be used in combination with a primer.
- Fixing time: 1 - 3 sec
- Operating temperature: from -55 to +95 °C
- Colour: transparent
- Certifications: NSF
Band width: from 27 to 67 mm Teeth per inch: from 0.8/1,2 to 5/8 Tooth shape: K Tooth hardness: 70 HRC Features: Bimetal blade with carbon steel body and HSS M42 cobalt-enhanced teeth Tooth set...
Liquid vacuum cleaners BREEZY capacity 25 liters
Liquid vacuum cleaners, small, reliable, practical and versatile with a twin engine 1300 Watt, barrel polpropylene filter, washable filter 2300 cm², sealed snap and cart with door accessories. Strong and practical closing hook system. Anti-shock head splash with and 4 sliding wheels Ø 50 mm. Quick coupling for tube, Ø 36 mm accessories Ø 36 mm Kit A included .
Made in Italy
N590001
Van €257.00
Liquid vacuum cleaners BREEZY capacity 35 liters
Professional liquid vacuum cleaners for high performance,reliable, versatile,practical, ideal for all types of workplaces. Motor twin engine 1300 Watt with a steel barrel and trolley im metal, 4 sliding wheels Ø 80 mm, washable polyester filter 2300 cm² tested Anti-shock head. Quick coupling for tube accessories Ø 40 mm, accessories Ø 40 mm Kit B included.
Made in Italy
N591001
Van €330.00
Liquid vacuum cleaners BREEZY capacity 50 liters
Professional liquid vacuum cleaners for high performance, reliable, versitile, practical, ideal for all types of workplaces. Equipped with a overhead door frame for easier emptying. Motor twin engine 1300 Watt, steel barrel and trolley in metal, 2 sliding wheels Ø 80 mm + 2 sliding wheels Ø 200 mm, washable polyester filter 6900 cm² tested Anti-shock head. Quick coupling for tube Ø 40 mm, accessories Ø 40 mm Kit B included.
Made in Italy
N592001
Van €378.00
Liquid vacuum cleaners BREEZY capacity 70 liters
Professional liquid vacuum cleaners for high performance, reliable, versitile, proctical,ideal for all types of workplaces. Equipped with overhead door frame for easier emptying Motor twin engine 1300 Watt, steel barrel and trolley in metal, 2 sliding wheels Ø 80 mm + 2 sliding wheels Ø 200 mm, washable polyester filter 6900 cm² Anti-shock tested. Quick coupling for tube accessories Ø 40 mm, accessories Ø 40 mm Kit C included.
Minimal lubricating control unit for machines LTEC MICRO DROP
LTEC'S minimal lubricating systems have been designed to replace the traditional lubrication with oil emulsion or neat oil in machining with chip removal, molding and cold deformation. These units have been designed to use fluids from renewable bases which replace conventional fluids eliminating the obligation of registration and disposal of used liquids.
The micro pneumatic pumps dose the minimum amount of lubricant transported by a flow of compressed air flow to the contact point tool/ workpiece without creating fog or pollution. The lubricant is consumed only during the processing phase.
It is possible to obtain an instant increase in productivity as it helps eliminate cleaning times usually required by the machine as well as it surrounding working area.
A further advantage in cost reduction is derived from the increase in tool life, which, kept at a room temperature, significantly increases its life, it also eliminates the health problems derived from contact with traditional fluids.
MODEL FOR MACHINE TOOLS
The ECU consists of a 1.2-liter tank with electric level control, frequency generator, needle valve to regulate the flow of compressed air coming out of the nozzel, micro-pump single-acting pneumatic pump, solenoid valve to start and stopping the control unit, articulated nozzel (s) with 5 meters of coaxial pipe.
H14521, H14522
Van €628.00
Minimal lubricating control unit for sawing machines LTEC MICRO DROP
LTEC minimal lubricating systems have been designed to replace traditional lubrication with oil emulsion or neat oil in machining with chip removal, molding and cold deformation. Uses lubricants from renewable bases that replace conventional fluids, eliminating registration requirement and disposal of exhausted liquid.
The micro-pneumatic pumps dose the minimum amount of lubricant that is transported by a flow of compressed air towards the tool/workpiece contact point without creating mist or pollution. The lubricant is consumed only during the processing phase.
It is possible to obtain an immediate increase in productivity because machine, working area and piece cleaning times are eliminated.
A further advantage in cost reduction is derived from the increase in tool life, which kept at room temperature significantly increases its life; and also eliminates any possible health problems deriving from contact with traditional fluids.
MODEL FOR BAND SAWS
The ECU consists of a 1.2-liter tank with electric level control, frequency generator, needle valve to regulate the flow of compressed air coming out of the nozzel, micro-pump single-acting pneumatic pump, solenoid valve to start and the stop of the control unit, nozzel for band sawing machine complete with 5 meters of coaxial pipe.
H145034
Van €567.00
Molybdenum bisulphide multipurpose anti-spatter LTEC CLEAN WELD
The antispatter CLEAN WELD is a product designed to avoid the seizure between surfaces in contact in the presesence of high temperatures.
CLEAN WELD antispatter is ideal for preventing the adhesion of metal particles to the torch of the wire welders and the surfaces adjacent ot the weld.
CLEAN WELD thanks to its latest generation additives is a valid alternative to graphite and being free from silicones is an excellent product for the lubrication of catenaries for furnaces up to 800 ° C.
J8435400
Van €9.20
Multifuntion 4 in 1 maintenance LTEC MR041
Medium/high strength, high viscosity, thixotropic multifunction anaerobic adhesive. MR041 features a pump dispenser for precise dosing. This product is suitable for sealing flanges and fittings, braking screws and nuts, as well as locking cylindrical couplings. Product specifically designed for industrial maintenance.
- Amplitude of play: from 0.1 to 0.2 mm
- Operating time: -50 to + 150° C
- Colour Green
- Certifications: NSF - DVGW
J0190050
Van €13.40
Multipurpose anti-spatter LTEC SLICK SPRAY
Multi-purpose antispattern SLICK SPRAY is a product that is used in all continuous wire welding and metal working processes in which there are incandescent waste emissions. SLICK SPRAY guarantees superior safety thanks to the particular totally synthetic base and the absence of solvents. Silicon Free. The innovative formulation of SLIK SPRAY allows its use even in conditions of high metal slag formation by processing. The slag at high temperature when it comes into contact with the product does not develop harmful and polluting gases, thus safeguarding the health of the operator.