Zoeken
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
LTEC
Toon als
Sorteren op
Tonen
per pagina
Threadlockers with medium mechanical resistance LTEC FFM4
Threadlockers medium resistance, medium viscosity, thixotropic for braking and sealing threaded fasteners to be disassemble with standarad hand tools. Suitable for all metals.
- Max thread Ø M20
- Operating temperature: from -50 to + 150° C
- Blue colour
- Certification: NSF
- Max thread Ø M20
- Operating temperature: from -50 to + 150° C
- Blue colour
- Certification: NSF
J0120050, J0120250
Van €18.40
Universal absorbent pads LTEC GRAY DRY
GRAY DRY is a Universal product ideal for absorbing industrial liquids, oils, refrigerants, solvents etc. Absorbs instantly by capillary method up to 19 times its weight. Also suitable for water.
H41335040F, H41338240, H41338120
Van €150.96
Universal absorbents LTEC
DRY GRAIN is a granular environmentally friendly product based on natural components for the absorption of oils, greases, hydrocarbons and chemical products in the workplace. It is unalterable in contact with moisture and water, does not create slippery and dangerous mixtures. It is non-flammable and does not release the absorbed substances over time.
If stored in a dry place, DRY GRAIN has no expiry date. It can be disposed of as municipal waste as long as disposal is carried out in accordance with the regulations governing the disposal of the absorbed substance. DRY GRAIN is supplied in two grain sizes. The fine grained type is ideal for polluting films and is usually widely used in industry. The coarse grained type is more suitable if there is a large quantity of pollutants where the fine grained type is not effective. Absorbs approximately 130% of its own weight.
Complies with standard EU CEN TS 15366: 2010
Complies with standard Fr NF P 98-190
If stored in a dry place, DRY GRAIN has no expiry date. It can be disposed of as municipal waste as long as disposal is carried out in accordance with the regulations governing the disposal of the absorbed substance. DRY GRAIN is supplied in two grain sizes. The fine grained type is ideal for polluting films and is usually widely used in industry. The coarse grained type is more suitable if there is a large quantity of pollutants where the fine grained type is not effective. Absorbs approximately 130% of its own weight.
Complies with standard EU CEN TS 15366: 2010
Complies with standard Fr NF P 98-190
H415108G, H415112F
Van €31.62
Universal aspirators LTEC MINI STORM
Industrial mobile single-phase extra compact aspirators.
Practical and reliable with a very sturdy frame.
Features:
-2 Independent motor By-passes
- Manual mechanical filter shaker
- Voltage indicator
- Filter clogging indicator
- Suction Inlet 70 mm ø with reduction terminal quick
release hose 50 mm ø
- Accessories port
- Wheeled container for the aspirated material quick
release hook
Industrial mobile single-phase extra compact aspirators. Practical and reliable with a very sturdy frame. Features: -2 Independent motor By-passes - Manual mechanical filter shaker - Voltage indica...
Practical and reliable with a very sturdy frame.
Features:
-2 Independent motor By-passes
- Manual mechanical filter shaker
- Voltage indicator
- Filter clogging indicator
- Suction Inlet 70 mm ø with reduction terminal quick
release hose 50 mm ø
- Accessories port
- Wheeled container for the aspirated material quick
release hook
N601035
Van €2033.85
Universal detergent LTEC BLU WASHER
BLU WASHER detergent is a product composed of a balanced mixture of alkalis, wetting agents and detergents. BLUE WASHER is formulated to be a fast acting detergent safeguarding the material from surface corrosion of both natural and synthetic matrices.Thanks to the balancedformulation BLUE WASHER cleans and provides a slight anti- rust protection on the degreased metal surfaces.
The product should be used diluted in water at 4% - 8%.
J3545T2
Van €254.70
Universal emergency kit anti-spill LTEC GRAY DRY KIT
Emergency Kit consisting of:
- 30 pads 50 x 40 cm
- 3 sleeves Ø 8 x 120 cm
- 3 sleeves Ø 8 x 60 cm
- 1 bag of fine absorbent granules 10l
- 1 pair of gloves
- 1 mask
- 3 disposal bags
Supplied in a plastic trunk
H4134KIT65
Van €231.54
Universal safety solvent LTEC UNISOLV
The odorless, low-volatility solvent UNISOLV is a product formulated to maximize the cleaning and dissolving characteristics of dirt. Suitable for removing grease, oils and protective agents from mechanical parts and ideal for preparing surfaces to be painted and glued. The product has been designed to replace more dangerous solvents in mechanical workshops, maintaining very high cleaning power.
The odorless, low-volatility solvent UNISOLV is a product formulated to maximize the cleaning and dissolving characteristics of dirt. Suitable for removing grease, oils and protective agents from mec...
J3540T1, J3540T2
Van €46.40
VCI packaging LTEC
The LTEC VCI (Volatile Corrosion Inhibitor) bags have been designed to maximize the protection of machined components against rust or the formation of metal oxides during storage or transport.
They are made of low density polyethylene with the addition of volatile corrosion inhibitors and designed to effectively protect ferrous metals and alloys from oxidation. For the protection to be effective, the pieces to be protected should be dry and clean before they are inserted in the VCI bags and the package sealed. The volatile corrosion inhibitors become attached to the metal surface, preventing or blocking oxidation.
The LTEC VCI bags are compatible with the most common types of commercially available corrosion inhibitor oils and waxes.
The duration of protection is 36 months in an enclosed environment and 24 months in an open environment.
The LTEC VCI (Volatile Corrosion Inhibitor) bags have been designed to maximize the protection of machined components against rust or the formation of metal oxides during storage or transport. They ...
They are made of low density polyethylene with the addition of volatile corrosion inhibitors and designed to effectively protect ferrous metals and alloys from oxidation. For the protection to be effective, the pieces to be protected should be dry and clean before they are inserted in the VCI bags and the package sealed. The volatile corrosion inhibitors become attached to the metal surface, preventing or blocking oxidation.
The LTEC VCI bags are compatible with the most common types of commercially available corrosion inhibitor oils and waxes.
The duration of protection is 36 months in an enclosed environment and 24 months in an open environment.
H217010020X30, H217010033X22, H217010044X33
Van €205.00
Van €34.30
Wall holder for drums with dispenser LTEC DETGREEN
Chromed metal for 3 L and 5 L drums. Supplied with dowels and screws for perfect mounting.
J52313, J52315
Van €22.60