Winkelwagen
  • U heeft geen artikelen in uw winkelwagen.
Cataloghi

LTEC

Toon als
Sorteren op
Tonen per pagina
Multipurpose anti-spatter LTEC SLICK SPRAY Multi-purpose antispattern SLICK SPRAY is a product that is used in all continuous wire welding and metal working processes in which there are incandescent waste emissions.
SLICK SPRAY guarantees superior safety thanks to the particular totally synthetic base and the absence of solvents. Silicon Free.
The innovative formulation of SLIK SPRAY allows its use even in conditions of high metal slag formation by processing.
The slag at high temperature when it comes into contact with the product does not develop harmful and polluting gases, thus safeguarding the health of the operator.
J8440400
Van €5.27
Multi-purpose spray adhesive LTEC SPRAYGLUE Spray glue is a non-reusable multi-purpose spray adhesive.
Ideal for many types of gluing, It can withstand up to 200°C
Suitable for bonding paper, cardboard, wood, fabrics, leather, plastic, glass, fibers, rock wool and absorbent materials.
Spray glue is a non-reusable multi-purpose spray adhesive. Ideal for many types of gluing, It can withstand up to 200°C Suitable for bonding paper, cardboard, wood, fabrics, leather, plastic, glass,...
J1330400
Van €5.79
Neutral detergent LTEC FULNET FULNET is a liquid detergent of acquamarine colour with neutral pH, usable both diluted and pure. FULNET is a low-foaming product that requires low rinsing operations. Thanks to it neutral pH, FULNET is also indicated for the removal of neat and emulsifiable oils from surface. After applying the FULNET detergent, wait a few seconds for the product to fully express its disintegrating action on the dirt.
APPLICATIONS
Hard surfaces in general, plastics and varnishes, synthetic surfaces. Machine tools, textiles and printing machines. Car interiors and industrial vehicles. Porcelain, Marble, Aluminum, Vinyl, Linoleum and industrial flooring in general.
J35181
Van €6.70
Non-woven material for filter mats LTEC Viscose BTZ offers higher filtration quality because porosity is uniform over the whole surface; it is more suitable for filtering emulsions.

The polypropylene BTK is more economical, but offers lower pore uniformity; it is also suitable for filtering neat oils.

The polyester is based of polyethylene which has the features to offer a perfect filtration for neat cutting oils on mineral based and synthetic fluids.

The weight per square meter is directly proportional to the filtration quality; a higher weight retains the finer dust, while a lighter weight allows the micro-scrap to pass through.
H4110K21000, H4110K2500, H4110K2700, H4110K31000, H4110K3500, H4110K3700, H4110K51000, H4110K5700, H4110K71000, H4110K7700, H4110P301000, H4110P30700, H4110P451000, H4110P45700, H4110P701000, H4110P70700, H4110Z251000, ...
Van €22.26
Polish for stainless steel LTEC SHINOX LUCIDANTE SHINOX is a polishing product for parts and surfaces in steel and is also effective on chrome-plating. Thanks to its innovative formulation, the SHINOX polish is effective as a polishing and brightening product on all stainless steel and chrome surfaces, guaranteeing exceptional cleanliness and shine.
J2465400
Van €10.60
Polyvalent antispatters LTEC SLICK RTU Fluid ready to use, economical and ecological. SLICK RTU is a completely synthetic, transparent and solvent-free soldering agent. The product is Silicon free. Applied to areas adjacent to the areas to be welded, it prevents slag and fusion sprays from adhering, facilitating subsequent cleaning steps. SLICK RTU is used in all continuous wire welding, laser cutting and metalworking processes where there are incandescent waste emissions. The particular totally synthetic base and the absence of solvents, allows the use of SLICK RTU even in cases where there is a high formation of slag, in contact with which SLICK RTU does not develop harmful and polluting gases, safeguarding health operator and environment. METHOD OF USE SLICK RTU is used as it is using normal sprays. SLICK RTU is sprayed in the welding torch and on the surfaces involved in laser cutting.
J844520
Van €81.30
Protector with high zinc content LTEC ULTRA ZINC II The ULTRA ZINC II high zinc protective product is a product designed and formulated to cover all ferrous surfaces and has the task of improving the protection of surfaces. Contains 99% purity zinc with the task of maximizing surface protection. The surface of the product after the application of ULTRA ZINCE II takes on the apperance of a bright zinc coating.
The ULTRA ZINC II high zinc protective product is a product designed and formulated to cover all ferrous surfaces and has the task of improving the protection of surfaces. Contains 99% purity zinc wi...
J2450400
Van €7.31
Quick penetrating release agent with lubricating action LTEC BOLT SBLOC BOLT SBLOC is a multi-purpose lubricating, releasing and cleaning product with high capacity of action; it contains highly refined solvents with high capacity action that guarantee high product performance.
The BOLT SBLOC releasing lubricant, thanks to its formulation, has the ability to release and at the same time lubricate the oxidized corroded mechanical parts: this thanks to its high penetrating power. Thanks to its new spray dispenser the BOLT SBLOC has a triple possibility of use for direct, short and long range vaporization.
The BOLT SBLOC product, thanks to its new packaging also works upside down. The innovative formulation of the product has made it possible to eliminate chlorinated solvents from the formulation, maintaining the lubrication performances at a very high level intact. The BOLT SBLOC release product is entirely produced, checked and packaged in Italy according to the highest standards.
The product is recommended for lubrication, cleaning and protection of mechanical parts of machines. Thanks to its formulation, the product has a high water repellent and protective capacity against atmospheric agents. It unlocks, lubricates, cleans, removes moisture and prevents corrosion.
J2120400
Van €7.90
Retainers for cylinder couplings LTEC BC8 High strength anaerobic blocker, medium viscosity, resistant to high temperatures. Suitable for fixing bearings, gears, rotors and coaxial couplings in general. - Gap filling: 0.05 to 0.15 mm - Operating time: -50 to +180°C - Colour: green
J0180050
Van €18.40
Stainless steel coating LTEC INOX SHIELD INOX SHIELD is a coating based on stainless steel in a can suitable for the coating of ferrous metals in general.

The SHIELD INOX coating has the ability to restore the stainless patina affected by welding operations.

Thanks to its innovative formula, INOX SHIELD withstands high temperatures up to 600 ° C.
INOX SHIELD is a coating based on stainless steel in a can suitable for the coating of ferrous metals in general. The SHIELD INOX coating has the ability to restore the stainless patina affected by ...
J2460400
Van €12.90
Suction cup brushes with rubber strips and grip regulator Suction cup brushes with rubber strips and grip regulator.
N003950400, N003950500
Van €114.49
Threaded fitting sealants precise LTEC Anaerobic sealant adhesive for threaded fittings; medium strength, medium/low viscosity. Suitable for relatively precise hydraulic and pneumatic fittings. - Maximum diameter: MA20 - Operating temperature: from -50 to +150° C - Brown colour
J0177050
Van €15.90
Threadlockers with high mechanical resistance LTEC FFF7 Threadlokcers with high mechanical resistance, medium viscosity for permanent braking and sealing of threaded fasteners.
Suitable for all metals.
- Max thread Ø M20
- Operating temperature: from -50 to +150° C
- Colour Green
- Certifications: NSF
J0170050, J0170250
Van €18.40
Threadlockers with medium mechanical resistance LTEC FFM4 Threadlockers medium resistance, medium viscosity, thixotropic for braking and sealing threaded fasteners to be disassemble with standarad hand tools. Suitable for all metals.
- Max thread Ø M20
- Operating temperature: from -50 to + 150° C
- Blue colour
- Certification: NSF
J0120050, J0120250
Van €18.40
Universal absorbent pads LTEC GRAY DRY GRAY DRY is a Universal product ideal for absorbing industrial liquids, oils, refrigerants, solvents etc. Absorbs instantly by capillary method up to 19 times its weight. Also suitable for water.
H41335040F, H41338240, H41338120
Van €150.96
Universal absorbents LTEC DRY GRAIN is a granular environmentally friendly product based on natural components for the absorption of oils, greases, hydrocarbons and chemical products in the workplace. It is unalterable in contact with moisture and water, does not create slippery and dangerous mixtures. It is non-flammable and does not release the absorbed substances over time.
If stored in a dry place, DRY GRAIN has no expiry date. It can be disposed of as municipal waste as long as disposal is carried out in accordance with the regulations governing the disposal of the absorbed substance. DRY GRAIN is supplied in two grain sizes. The fine grained type is ideal for polluting films and is usually widely used in industry. The coarse grained type is more suitable if there is a large quantity of pollutants where the fine grained type is not effective. Absorbs approximately 130% of its own weight.
Complies with standard EU CEN TS 15366: 2010
Complies with standard Fr NF P 98-190
H415108G, H415112F
Van €31.62