Zoeken
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
WRK
Toon als
Sorteren op
Tonen
per pagina
Van €292.28
Taps drill-out tools in solid carbide WRK
This solid carbide tool was designed to extract broken taps from holes.
Machining is normally run dry.
For best centring, follow the procedure below:
- (1) Flatten the broken tap, using a larger tool or
a same-sized hand mill.
- (2) Select a suitable tap destroying tool and execute the work
being careful that the processed rigidity is the maximum.
Recommended cutting speed not greater than 45 m/mm and
feed rate from 0.03 to 0.05 mm.
- (3) Remove the tap pieces left along the walls using
a sharp tool.
- (4) When finished, we recommend reprocessing the hole with a drill
of the same size as the pre-tapping hole.
Machining is normally run dry.
For best centring, follow the procedure below:
- (1) Flatten the broken tap, using a larger tool or
a same-sized hand mill.
- (2) Select a suitable tap destroying tool and execute the work
being careful that the processed rigidity is the maximum.
Recommended cutting speed not greater than 45 m/mm and
feed rate from 0.03 to 0.05 mm.
- (3) Remove the tap pieces left along the walls using
a sharp tool.
- (4) When finished, we recommend reprocessing the hole with a drill
of the same size as the pre-tapping hole.
A181012, A18103, A18104, A18104,5, A18105, A18106, A18108, A181010
Van €56.95
Van €1.15
T-handle hexagonal wrenches with fixed rod WRK
Vanadium chromium coated steel, burnished ends, up to 5 mm.
Van €10.02
Tronchesi a tagliente diagonale con testa inclinata WRK
Vanadium chrome burnished steel body, micro-sandblasted head, cutter for hard and piano wire, Duoform bi-component handles. Its angled head and ergonomically designed handles provide for an increased and improved gripping.
F1730180
Bel voor prijsopgave
Tronchesi a tagliente diagonale tipo forte WRK
STANDARD DIN/ISO 5749
Nippers great heavy- duty effect with diagonal cutting in chrome vanadium steel, sharp for hard and harmonic wire. Duoform bi-component handles.
F1740160
Bel voor prijsopgave
Tronchesi a tagliente diagonale VDE isolati 1000 Volt WRK
Chrome vanadium polished steel body, cutter for hard wire, ergonomically designed VDE 1000 Volt bi-component handles.
F1710160V
Bel voor prijsopgave
Tronchesi a tagliente diagonale WRK
Chrome vanadium micro-sandblasted steel body, cutter for hard wire, Duoform bi-component handles.
F1700160
Van €14.94
Tronchesi inclinati a 45° per materiali plastici WRK
STANDARD DIN ISO 5743
45° Inclined cutting nippers with rectified cutting edges for sharp cutting without smearing synthetic resins, with return spring.
Chrome-vanadium steel forged, hardened, handles coated with synthetic resin.
F1759160
Van €37.20
Material: High speed steel Co Standard: DIN 850AB Shank: Weldon Teeth: Alternate Surface treatment: Bright Application: T-slots TYPE: SERVICE GEOMETRY: - APPLICATION: - MATERIAL: HSS
A541512,5, A541516, A541518, A541521, A541525, A541528, A541532, A541536
Van €96.80
Material: High speed steel Co8 Standard: DIN 327 B Tolerance: h7 Shank: Weldon Helix: 30° right-hand Surface treatment: Bright Application: Copying TYPE: BALL-NOSE GEOMETRY: STD APPLICATION:...
A50402, A50403, A50404, A50405, A50406, A50408, A504010, A504012, A504014, A504016, A504020
Van €33.10
White fine fabric cleaning rags WRK
Sanitized, mixed -fabric seconds white sheet rags. Supplied in a 10kg convenience packaging.
J544010
Van €62.60
White industrial cleaning rags WRK
Sanitized, mixed -fabric seconds white rags. Supplied in a 10kg convenience packaging.
J543010
Van €38.80
Wing nuts in technopolymer zinc-plated stud
Wing nuts in technopolymer black colour with matt finish, zinc plated steel stud.
N87190420, N87190640
Van €0.98
Van €21.01