Zoeken
Cataloghi
- Alpa
- DORMER
- GERARDI
- IMET
- KEMMLER
- Link
- PRAMET
- Vardex
- Voelkel
- Walter
- SANDVIK_COROMANT
Water-miscible coolants
Toon als
Sorteren op
|
Antifoam LANDOIL DEFOAMER 155
Defoamer-155 is a silicone antifoam in emulsion specific for aqueous systems with excellent dispersibility and rapid effectiveness, with a long-lasting effect.
Defoamer-155 can be added as is to the emulsion or possibly diluted 1:10. It can be used in emulsions for metalworking, in waste water treatment systems, purification plants, process waters etc. It is extremely effective even at low dosages and in a wide pH range. The product is inert and does not chemically interfere in the system into which it is introduced. BENEFITS AND ADVANTAGES - Quick action - Long-lasting action - Low dosages (from 5 to 200 ppm) - Expansive pH range of use (2 -12) - For all aqueous systems
H35420005
Meer details
|
Van €31.00
|
|
Biocidal preservative additive for emulsions LANDOIL CLEAN BATT B
CLEAN BATT B is a broad-spectrum bactericidal product that can be used on any type of emulsion.The CLEAN BATT B bactericide is a specific formulation to counteract the degradation phenomena that cause bad odors insystems such as emulsions and washing waters.
ADVANTAGES: - Wide spectrum of action - Suitable for eliminating any microorganism - Ease of use - Eliminates bacteria and bad odors Recommended concentrations: 100 mL per 100 liters
H35180005
Meer details
|
Van €150.00
|
|
Ester-based metalworking fluid LANDOIL Futura S UNI
Futura S UNI is a semisynthetic, ester-based water-miscible metalworking fluid derived from renewable raw materials.
It is free of chlorine, boron and bactericides. Futura S UNI is a universal metalworking fluid designed for use in medium-heavy-duty machining and grinding operations on all materials: steels, stainless steels, titanium and cast irons; it can also machine aluminium alloys. The formulation has a very high balance between lubricity and detergency, making it an extremely versatile product for all types of machining. In water it produces a very stable translucent emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft.
H02130025, H02130200
Meer details
|
Van €215.00
|
|
Fungicide preservative for emulsions LANDOIL CLEAN BATT F
CLEAN BATT F is a broad-spectrum fungicide that can be used on all emulsions.
It is a specific product to counteract the degradation phenomena of emulsions and, in particular, the outcropping gummy films typical of fungal colonies. ADVANTAGES: - Broad spectrum of action - Suitable for eliminating any fungus - Ease of use - Eliminates fungi, algae and yeasts Recommended concentrations: 100 - 300 mL per 100 litres
H35190005
Meer details
|
Van €150.00
|
|
Maintenance additive for emulsifiable fluids LANDOIL DOUBLE ACTION
The product DOUBLE ACTION is an emulsion stabiliser that has the task of rebalancing the water-oil system after prolonged use of the cooling lubricant.
Thanks to its innovative formulation, it is able to protect machine surfaces from oxidation. Thanks to the components it contains, DOUBLE ACTION is able to have a cleansing action on sludge and foreign oils.
H35610005
Meer details
|
Van €105.00
|
|
Mineral-based metalworking fluid LANDOIL Multifluid E POWER
Multifluid E POWER is an emulsifiable water-miscible metalworking fluid with a high lubricant content, based on highly refined mineral oils and special additives of synthetic origin. It is free of chlorine and bactericides.
Multifluid E POWER is a metalworking fluid specifically designed for use in medium to heavy metalworking operations on steels, stainless steels, titanium, aluminium alloys and cast iron. It can also be used in grinding due to its good foam control. In water it produces a very stable Milky emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft.
H00310025, H00310200
Meer details
|
Van €197.50
|
|
Mineral-based metalworking fluid LANDOIL Multifluid E POWER EP
Multifluid E POWER EP is an emulsifiable water-miscible metalworking fluid with a high lubricant content, based on highly refined mineral oils, grease additives and EP. It is free of bactericides.
Multifluid E POWER EP is a metalworking fluid specifically designed for use during medium to heavy metal removal operations on alloyed and stainless steels. However, it can also be used on aluminium alloys and yellow alloys. It has high anti-rust and odour resistance even under critical conditions. In water it produces a very stable Milky emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft.
H00120025, H00120200
Meer details
|
Van €205.00
|
|
Mineral-based metalworking fluid LANDOIL Multifluid E UNI
Multifluid E UNI is an emulsifiable water-miscible metalworking fluid with a high active part content, based on highly refined mineral oils and additives. It is free of chlorine, boron, amines and formaldehyde donor bactericides.
Multifluid E UNI is a universal metalworking fluid designed for use during heavy-duty machining operations on steel, stainless steel, aluminium alloys and yellow alloys. The product is particularly suitable for all heavy-duty operations on difficult-to-machine aluminium alloys and copper alloys. In water it produces a very stable Milky emulsion. Its characteristics make it suitable for use with preferably soft water.
H00140025, H00140200
Meer details
|
Van €202.50
|
|
Mineral-based metalworking fluid LANDOIL Multifluid E UNI EP
Multifluid E UNI EP is an emulsifiable water-miscible metalworking fluid with a high lubricant content, based on highly refined mineral oils and EP additives. It is free of boron, amines and formaldehyde-donating bactericides.
Multifluid E UNI EP is a universal metalworking fluid designed for use during heavy-duty machining operations on steel, stainless steel, aluminium alloys and yellow alloys. The product is particularly suitable for all heavy-duty operations on difficult-to-machine ferrous materials such as high-alloy and stainless steels. In water it produces a very stable Milky emulsion. Its characteristics make it suitable for use with preferably soft water.
H00090025, H00090200, H00090005
Meer details
|
Van €49.20
|
|
Mineral-based metalworking fluid LANDOIL Multifluid S
Multifluid S is a semisynthetic water-miscible metalworking fluid with medium lubricant content, based on highly refined mineral oils and additives. It is free of chlorine and bactericides.
Multifluid S is a metalworking fluid designed for use during light general machining on all materials. It is a versatile product, compatible with all materials, does not leave stains or halos and does not separate soaps. In water it produces a very stable semi-transparent emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft.
H01260025, H01260200, H01260005
Meer details
|
Van €36.75
|
|
Mineral-based metalworking fluid LANDOIL Multifluid S UNI
Multifluid S UNI is a semisynthetic water-miscible metalworking fluid with medium lubricant content, based on highly refined mineral oils and special additives of synthetic origin. It is free of chlorine and bactericides.
Multifluid S UNI is a universal metalworking fluid designed for use during machining and grinding operations on all materials: steel, stainless steel, titanium, light alloys and cast iron. In water it produces a very stable translucent emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft.
H00440025, H00440200
Meer details
|
Van €180.00
|
|
Sanitizing detergent for machine tools LANDOIL WHAMEX
WHAMEX is successfully used when the emulsion has to be replaced during operation and it is necessary to disinfect as well as clean effectively.
Used at the recommended concentration, it removes accumulated dirt from the system and pipes, making cleaning easier. When introduced into the system, work can continue as it does not interfere with working conditions. METHOD OF USE - Introduce WHAMEX at 1-3% in the emulsion to be replaced 24 h before emptying - Work normally or circulate the system - Empty and remove all residues manually - Rinse if possible - Introduce new emulsion at the indicated concentration into the system
H35110005, H35110025
Meer details
|
Van €46.75
|
|
Silicone Defoamer LANDOIL DEFOAMER TK-100
DEFOAMER TK-100 is a siloxane-modified defoamer designed primarily for use in a wide variety of metalworking emulsions with a long-lasting defoaming effect.
The properties and performance of an antifoam agent are highly dependent on the specific formulation in which it is used and, therefore, should always be tested (possibly at different treatment levels, temperatures and/or time intervals) prior to use. An initial dosage level of 0.01 to 0.50 per cent of the emulsion volume in the tank is recommended. Always stir before use as the product tends to separate slightly. Stir the product and repeat the quality test one year after the date of manufacture. Defoamer-TK-100 is washable according to typical industrial washing and rinsing procedures, so that the subsequent paintwork, after washing, is free of defects.
H35470005
Meer details
|
Van €318.00
|
|
Universal emulsified oil for band saws GUABO ALL IN ONE GREEN SAW
ALL IN ONE GREEN SAW is an innovative coolant based on esters derived from renewable raw materials. It is ready for use : a universal product for steel machining, stainless steel, titanium and aluminum alloys, even those particularly sensitive to staining. It can also work yellow alloys and cast iron.
PROPERTIES The special additive, free from chlorine, boron and formaldehyde donor vactercides, makes it an absolutely avant-garde product from an eco/toxicological point of view. Furthermore, thanks to the new generation components with which it is formulated. ALL IN ONE GREEN SAW has excellent resistance to foam even at high pressures. The advantage of having emulsion already prepared with water of controlled hardness allows for several advantages: - No need for measuring jugs or mixing systems - No risk of calculation errors in finding the correct proportion - ZERO risk of INCOMPATIBILITY of water hardness - ZERO waste of staff time APPLICATION The product is suitable for blanking operations with saws of steel, stainless steel, titanium and aluminum alloys, even those particularly sensitive to staining. It can also work yellow alloys and cast iron.
H005025
Meer details
|
Van €81.90
|
|
Water-Miscible Metalworking Fluid LANDOIL Futura S UNI
Futura S UNI is a water miscible metalworking fluid based on esters derived from renewable raw materials.
It is free of chlorine, boron, bactericides and nitrosatable amines. Futura S UNI is a universal metalworking fluid designed for use in medium-heavy-duty machining and grinding operations on all materials: steels, stainless steels, titanium and cast irons; it can also machine aluminium alloys. The formulation has a very high balance between lubricity and detergency, making it an extremely versatile product for all types of machining. In water it produces a very stable translucent emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft. |
|
|
Water-Miscible Metalworking Fluid LANDOIL Futura UNI
Futura S UNI is a water-miscible metalworking fluid based on esters derived from renewable resources.
It is free of chlorine, boron, bactericides and nitrosatable amines.
Futura S UNI is a universal metalworking fluid designed to be used in medium-duty machining operations and grinding of all materials: steels, stainless steels, titanium, aluminium alloys, yellow alloys and cast iron. The formulation has an exceptionally high balance between lubricity and detergency, which makes it an extremely versatile product in all types of processing.
It produces a very stable translucent emulsion in water.
Its characteristics make it suitable for use with all types of water, both hard and soft.
|
|
|
Water-Miscible Metalworking Fluid LANDOIL Multifluid E POWER
Multifluid E POWER is a water miscible metalworking fluid with a high lubricity content, based on highly refined mineral oils and special synthetic additives. It is free of chlorine, bactericides and nitrosatable amines.
Multifluid E POWER is a metalworking fluid specifically designed for use in medium to heavy machining operations on steels, stainless steels, titanium, aluminium alloys and cast iron. It can also be used in grinding due to its good foam control. In water it produces a very stable milky emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft. |
|
|
Water-Miscible Metalworking Fluid LANDOIL Multifluid E POWER EP
Multifluid E POWER EP is a water miscible metalworking fluid with a high lubricity content, based on highly refined mineral oils, fatty additives and EP. It is free of bactericides and nitrosatable amines.
Multifluid E POWER EP is a metalworking fluid specifically for use in medium to heavy metal removal operations on alloyed and stainless steels. However, it can also be used on aluminium alloys and yellow alloys. It has high anti-rust and odour resistance even under critical conditions. It produces a very stable, milky emulsion in all water types. |
|
|
Water-Miscible Metalworking Fluid LANDOIL Multifluid E UNI
Multifluid E UNI is a water miscible metalworking fluid with a high active part content, based on highly refined mineral oils and additives. It is free of chlorine, boron, amines and formaldehyde donor bactericides.
Multifluid E UNI is a universal metalworking fluid designed for use in heavy-duty machining operations on steels, stainless steels, aluminium alloys and yellow alloys. The product is particularly suitable for all heavy-duty operations on difficult-to-machine aluminium alloys and copper alloys. In water it produces a very stable milky emulsion. Its characteristics make it particularly suitable for use in soft water. |
|
|
Water-Miscible Metalworking Fluid LANDOIL Multifluid E UNI EP
Multifluid E UNI EP is a water miscible metalworking fluid with a high lubricity content, based on highly refined mineral oils and EP additives. It is free of boron, amines and formaldehyde-donating bactericides.
Multifluid E UNI EP is a universal metalworking fluid designed for use during heavy machining operations on steel, stainless steel, aluminium alloys and yellow metals. The product is particularly suitable for all heavy-duty operations on difficult-to-machine materials such as high-alloy steels and stainless steels. In water it produces a very stable milky emulsion. It particularly suitable for use in soft water. |
|
|
Water-Miscible Metalworking Fluid LANDOIL Multifluid S
Multifluid S is a semi-synthetic water miscible metalworking fluid with medium lubricant content, based on highly refined mineral oils and additives. It is free of chlorine, bactericides and nitrosatable amines.
Multifluid S is a metalworking fluid designed for use during light general machining on all materials. It is a versatile product, compatible with all materials, does not leave stains or halos and does not separate soaps. In water it produces a very stable semi-transparent emulsion. Its characteristics make it suitable for use with all types of water, both hard and soft. |
|
|
Water-Miscible Metalworking Fluid LANDOIL Multifluid S UNI
Multifluid S UNI is a semi-synthetic water-miscible metalworking fluid with medium lubricity content, based on highly refined mineral oils and special synthetic additives. It is free of chlorine, bactericides and nitrosatable amines.
Multifluid S UNI is a universal metalworking fluid designed to be used in all chip removal and grinding operations on all materials: steels, stainless steels, titanium, light alloys and cast iron. It produces a very stable translucent emulsion in water. Its characteristics make it suitable for use with all types of water, both hard and soft. |
|