Van Maele. Metal and mould protectors

LANDOIL PROTEX DW/O Protective Fluid Protex DW /O is a corrosion protection fluid with a dewatering action designed specifically for the protection of steel laminates and semi-finished products even of complex geometry, as well as for the external protection of parts subject to subsequent handling. It is ideal in situations where there is a need to leave a thin protective layer on the treated surface, easily removable with rags or ordinary solvents.
The product is easily applied by immersion, spray, brush and can be removed with rags, industrial cleaners, alkaline solutions and/or petroleum solvents.
The excellent wetting power allows any moisture or water film to be removed from the treated surfaces.
The anti-corrosion and anti-oxidant components form a thin film that protects the parts for a medium to long period (12 months) if the material is properly stored indoors after treatment.

H2106025, H2106400

Meer details

Van €6.30

Bekijk producten (2)

LANDOIL PROTEX W protective fluid PROTEX W is a wax-based corrosion protection fluid for metal components that are stored in high humidity and high salinity conditions. Thanks to a specific formulation and excellent balance of detergents and solvents, PROTEX W has excellent degreasing properties and a dewatering effect.
The product passes ASTM B117 tests (salt spray test) with 90 hours of resistance. PROTEX W retains its protective capacity for 15 months in case of indoor storage while outdoors, by allocating the material to covered areas, it manages to maintain its protective capacity for 9 months.

H2117025

Meer details

Van €273.75

Kopen

LANDOIL RUST REMOVER RUST REMOVER is a water-based liquid solution for removing surface rust. It is a product that restores the lustre of oxidised metals. RUST REMOVER is biodegradable; it is also a safe product for the operator, is non-toxic, non-corrosive or flammable and contains no volatile organic compounds.
RUST REMOVER will not damage copper, brass, aluminium, plastic, rubber, wood or vinyl. It will not remove paint or chrome, except when this is oxide-based.
For best results, rusted parts should be fully immersed in RUST REMOVER and removed when the rust layer is completely gone. A superficial patina of rust will take 20 to 30 minutes, a medium patina will take up to 4 hours and very rusty parts may require an overnight immersion.

H21910025

Meer details

Van €302.50

Kopen

Mould protectives OKS 2301 The mould protector 2301 is designed to protect metal surfaces from corrosion caused by atmospheric agents.
2301 creates a non-sticky water repellent film against corrosion that is visible to the naked eye.
2301 has a characteristic green colour so that is can be quickly checked during application.
The film created by 2301 has a thickness of 10 microns per single application.
The product can easily be removed using cleaner 2611. Code (J3510500).

H2120400

Meer details

Van €26.20

Kopen

Protectives for metals OKS 2101 2101 is an NSF H2 certified metal protective. It creates an easily removable corrosion-resistant protective wax film that lasts for up to two years.
2101 is suitable for protecting any type of bare metal surface that is to be stored for a long time and that is exposed to atmospheric agents.
The product can be used in the metalworking, shipbuilding and transport industries.
Its innovative formulation makes 2101 highly effective and its good film-forming properties mean that it provides exceptional protection against corrosion and oxidation.

H2122400

Meer details

Van €24.50

Kopen

VCI packaging LTEC The LTEC VCI (Volatile Corrosion Inhibitor) bags have been designed to maximize the protection of machined components against rust or the formation of metal oxides during storage or transport.
They are made of low density polyethylene with the addition of volatile corrosion inhibitors and designed to effectively protect ferrous metals and alloys from oxidation. For the protection to be effective, the pieces to be protected should be dry and clean before they are inserted in the VCI bags and the package sealed. The volatile corrosion inhibitors become attached to the metal surface, preventing or blocking oxidation.
The LTEC VCI bags are compatible with the most common types of commercially available corrosion inhibitor oils and waxes.
The duration of protection is 36 months in an enclosed environment and 24 months in an open environment.

H217010020X30, H217010033X22, H217010044X33

Meer details

Van €205.00

Bekijk producten (3)